New Guy!!
 

New here anyways. Been lurking here quite a while and got tired of not being able to see the pictures. I hang out at pro-touring and the hamb, and lurk at corner-carvers as well.

You may have seen my 32 around and we (my wife, Angela, aka the shoe) are bulding a 66 Mustang full of DSE and GMR stuff.

We'll see you at the LatG party at SEMA!

Thanks!

Welcome to the best car site on the net Donny! About time you showed up here...:D :cheers:

Awesome!

I think I just saw pics of the '32 at a GG show autocross event in the GG Gazette?

Welcome! See you in November!

Thanks Ron and Greg.

I just realized I screwed up already. My fat fingers forgot to push "o" when I entered my username......should be dontlifttoshift could a mod help me out with that please.

FNGs.....at this rate I won't even qualify to be a grenade inspector.

fixed it for 'ya. :thumbsup:

Donny - welcome to the greatest site on the internets. :D

Love the hot rod and know you get out there and abuse it! :thumbsup:

Jody, thanks for that. You and I have a mutual friend in Kwhizz.

Flash, yeah, I beat the snot out of that thing....it sure is fun.

Ken's a great guy! :thumbsup:

see you at the party. Gotta love a guy that hangs out at the HAMB and Lat-G. do the HAMB boys know you are playin with kids that like 18" wheels and skinny tires?

Welcome!

FNG! Get it straight, willya :lol: Thanks for the good deal on that accessory drive :thumbsup:

Now get in here and contribute...post up some pics of the shop, running that hot rod on the AutoX and a pic of that rear housing on the lathe (my personal favorite).

Nice to see another Street Rod guy on here, The people on this site like looking at them also. Welcome :thumbsup:

Welcome aboard!! :thumbsup:

Welcome :thumbsup:

Welcome to the board. Did not know your a local guy. Saw you tearing up the autocross at Ind, you did pretty good for just having a drop axle.

Mike

Welcome!

Thanks guys!! Here are some pics from the last 32 redeux.....

built my own accessory drive from half a VintageAir Frontrunner

[IMG]http://frameupwheelworks.smugmug.com.../S/136-2-S.jpg[/IMG]

Rear coilover mounts came out cool. Single shear, I know, but almost all hot rods are set up this way. I can rotate the billet piece to adjust ride hieght up and down and change the angle on the coilovers.

[IMG]http://frameupwheelworks.smugmug.com.../M/269-2-M.jpg[/IMG]

3 link in this hoopty. That giant crossmember is right behind the seat.....

[IMG]http://frameupwheelworks.smugmug.com.../M/299-2-M.jpg[/IMG]

The floors were styled after a 34 Ford.....sort of. Yep steel floors, plastic car:rolleyes:

[IMG]http://frameupwheelworks.smugmug.com.../0/M/491-M.jpg[/IMG]

Wiring panel getting started. All tied with wax string, I learned from a guy that worked at the power company. If I get on a roll it is actually faster than zip ties.

[IMG]http://frameupwheelworks.smugmug.com.../0/M/602-M.jpg[/IMG]

[IMG]http://frameupwheelworks.smugmug.com.../0/M/640-M.jpg[/IMG]

Here is a shot with the other wheels and tires. For this car I really prefer this look......sadly this was the last time these wheels were on. The car is running big brakes now with a GMR floater in the back. Front wheels no longer fit:(

[IMG]http://frameupwheelworks.smugmug.com.../0/M/730-M.jpg[/IMG]

That's the short version anyways.....still not finished with it. Got a few things to wrap up this winter and then it's on to the "late model" 66 Mustang.

Bad ass stuff. What's the powerplant consist of? :unibrow:

Simplicity....2011 5.3 takeout that I bought from SLP on ebay as a long block. Eliminate the afm, Mast cam (along with their harness and ecm), LS2 intake and LS3 throttle body and a stock LS3 oil pan.