|
Another 2nd Gen Camaro Named RelliK
1 Attachment(s)
Totally rebuilding my Camaro and thought I'd post some pics.
Plans call for an all aluminum bow tie small block with fast efi. Pump gas and 550+ HP Repaint Rewire New rearend and rear suspension. Ride tech Coil overs Transmission tbd. Mini Tub All Carbon Fiber dog house. Stay Tuned |
http://i295.photobucket.com/albums/m...g/DSCF0823.jpg
http://i295.photobucket.com/albums/m...1115-00399.jpg http://i295.photobucket.com/albums/m...g/DSCF0813.jpg Mini Tub is complete along with Firewall smoothed.. Mounts are made for all the electronics under the dash Car will be back from paint shop next week. |
Pictures of the Carbon Fiber grill I'm machining coming soon......
|
I have watched some of your builds on pro-touring. We live really close to each other, nice to see someone local building another pro-touring car. Not many in this area. Will be sweet once its done. I need to check it out sometime.
|
Looking good thus far. Keep the pics coming.
|
Great stuff. Was hoping you'd throw that 18 degree in this. :guns:
|
18 degree is going in. Took some compression out so it would be pump gas. Picture shows the aluminum block 18 degree engine in it.
|
Nice! I like the Baldwin paint scheme.
|
So, what was wrong with it as it sat? Subscribing to this one, all carbon fiber front end sounds sweet!
|
Carbon fiber grill insert I made
http://i295.photobucket.com/albums/m...3FDB5CBC08.jpg
http://i295.photobucket.com/albums/m...3FD45A2F7E.jpg I didn't want a 2 piece grill so I had to make my own. Thanks for looking Mike |
Very nice!
|
That front end is sweet, awesome job!
|
what are the specs on the engine? I see shaft mounted rockers.........:G-Dub:
|
Looking good. :thumbsup: Keep those photos coming.
Brian |
Coming home from paint today......Photos soon
|
Grill insert is very cool.What suspension are you going with.:thumbsup:
|
Scott
Rear I have the speedtech Torque arm with ridetech coilovers.....front I have hotchkis tubular a-arms with ridetech coilovers. I had the full hotchkis TVS suspension on it before and was very happy with it but switching to larger rear tires I decided to change directions... |
421 Aluminum Bowtie block.....Callies crank and rods.....18 degree bowtie cylinder heads cnc ported....Engine is getting freshened right now so I'm not sure what cam is going in....Prediction 600 hp on pump gas.
|
it was snowing outside so I didn't get any good pics
http://i295.photobucket.com/albums/m...ps768cbacf.jpg http://i295.photobucket.com/albums/m...ps9da81d5e.jpg |
Sinister!
|
Very Nice.
|
Car looks great so far.
Is the hood Anvil Auto's carbon fiber piece? |
Anvil hood,fenders,nose,trunk,rear wing,and inner fenders
|
Speedtech torque arm, ride tech coil overs, Moser rearend
http://i295.photobucket.com/albums/m...pse21596b8.jpg |
What's you initial impression of the TA? I'm considering going that route versus a four or three link setup for my Trans Am. It'll be a while before I ever get it done so I have plenty of time to gather reports and impressions.
Thanks |
I like the way the torque arm is made and I think it will perform well. I hope to be on the road in a month or so.
Mike |
Awesome! Thanks Mike. I'll be patient and wait for your ride report :thankyou:
|
I decided to make my own Finch style fuel and rear end vent. Then I made an adapter so it went in the original fuel vent location. No need to buy when I can make my own.
http://i295.photobucket.com/albums/m...ps1a10498b.jpg http://i295.photobucket.com/albums/m...ps2418328e.jpg http://i295.photobucket.com/albums/m...psc17687ba.jpg |
Quote:
|
Look's good.:thumbsup:
|
Vent is finished and installed where the original Charcoal canister was.
http://i295.photobucket.com/albums/m...psd5cad998.jpg |
Nice!
|
|
Looks killer Mike! How bout some interior and engine shots?
|
Sinister! Nice job...
|
Quote:
|
Yup that will do for sure! :thumbsup:
|
|
Man I never seen so much carbon in one spot.Awesome.
|
Very cool Mike! Couple of questions for you, one who's makes your hood? And two how much for the grill??? Opps one more if you have more of the grills will it work with the stock sheet metal?
Awesome car! |
| All times are GMT -7. The time now is 10:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net