4l80 six speed
 

anyone hear anything about the 4l80 six speed anymore?

Wouldnt that be a 6L80E?

4l80
 

.I think tci was offering a kit to change the 4l80 to a six speed, ..was wondering if anyone here used it..

Oh man, I hope so.

Trying not to get my hopes up but.............

BRB going to research

These have been available for about 5 years now. But, here you go. And it ain't cheap...http://www.tciauto.com/tc/6x-six-spe...ion-850hp.html

Here's a video for you too......

thanks for the video, do you know of anyone who has run this setup?

..just wondering if its better or worse than the 6l80. as far as setup..

Don't know anyone personally. But, I heard from forums and other guys who knew someone who ran it that is't not all cracked up to what's it supposed to be. Especially, not at the price of $6k. There are far better trannys out there.

The 6L80 is better in my opinion. Although, I have one, I don't have it installed into my truck yet and it won't be for a couple of years until I get to restoring my truck. There are certain perimeters you have to keep with the 6L80E, such as DBW, 58 tooth reluctor and if I'm not mistaken....E38 computer.

thanks for the info..

Oooooooooor, This?

http://www.powertraincontrolsolution...oduct=TCM-2600

$600 or so

PCS also sells the Valvebody to convert a 4l80 to a 6 speed.

http://www.powertraincontrolsolution...ed-Valve-Body/

great info, thanks guys

thanks badmatt this may be what im looking for!!

its a 4L80 that uses the overdrive clutch pack/modified to use the solidoinds to make it 6 speeds by using 2nd gear and overdrive and third gear and overdrive to make it 6 actual gears but it still retains the final drive ratio of the 4L80 which is .075 to 1