East Bay Muscle Cars Billet Fuel Filler!
 

East Bay Muscle Cars is excited to announce that our Billet Fuel Fillers, which have been in development over the past year, will soon be available for purchase. We will have two sizes, multiple finishes and also available in kit form specifically for the 67-68 Camaro. We will have pricing and shipping dates announced very soon. Stay tuned!

http://i864.photobucket.com/albums/a...ps8193918c.jpg


http://i864.photobucket.com/albums/a...ps349162d4.jpg
http://i864.photobucket.com/albums/a...ps63dbac45.jpg
http://i864.photobucket.com/albums/a...ps96e7616d.jpg

http://i864.photobucket.com/albums/a...ps33305661.jpg

Steve, those look bad ass.

Got any pics of them installed?

Nice job Steve. Those look pretty cool!!

Very nice and I know someone that is looking for exactly this !!!

Oh great.........another major want! Taking a knee to fuel the car get's old. :D

Nice design Steve, looking forward to seeing the kit details. :thumbsup:

Thanks guys! Attached are pics of the universal larger size on the 69, although that version is one of the very early multi piece design, it still gives a good visual. The second is the smaller version that will work in the 67/68, or available as a universal application, well have further details soon....

http://i864.photobucket.com/albums/a...ps788d7f21.jpg

http://i864.photobucket.com/albums/a...psfa49a449.jpg

Looks bad ass. definitely interested in one.

Awesome!!

Looks great Steve!

EBMC fuel fillers now available for purchase!

Large diameter measures 4.5" $259
Small diameter measures 3.75" (will fit in recess of 67/68 Camaro) $249
Option for Anodize (black or grey) $25
Option for polished finish $15

Small diameter seems as though it may work on 65/66 mustang as well
We will have complete kits for Camaro and Mustang coming soon, for now they are sold as a universal piece.
If interested please email to [email protected]

(Online store coming soon!)

http://i864.photobucket.com/albums/a...ps33a06ca7.jpg

http://i864.photobucket.com/albums/a...ps9a9c5a64.jpg

http://i864.photobucket.com/albums/a...ps82f3e2b8.jpg

http://i864.photobucket.com/albums/a...ps3c4c4b97.jpg


http://i864.photobucket.com/albums/a...ps30f3dcdb.jpg

Very nice, how resistant to fuel is anodizing? Will fuel drips cause any discoloration or finish to come off?

Thanks,
Should be fine. (An fittings, fuel rails, fuel filters, pumps ect.)

I'm sure this is a stupid question, but I wonder how this would look on the side of my 05
Mustang

Those are really nice.

A little update: We have universal ones available now and as far as the 67/68 Camaro kit, We have been working away at coming up with just the right transition hose from filler to tank and its taking a little longer than expected to get get it exactly to our standards. We are very close to having it ready though and will be taking pre orders in the next few weeks.
Thanks everyone!
EBMC

The EBMC/Keefer Design billet fuel filler kit for 67/68 Camaro's will be ready to ship within 2 weeks! It includes everything needed with only minor modifications necessary to install. Priced will start at $359 for natural finish. Email [email protected] to be put on the list and we'll contact you as soon as were able to ship. Thanks for everyones patience on the development of this innovative new product!

http://i864.photobucket.com/albums/a...psf1a90a69.jpg

It was asked on another forum if these are vented. The answer is Yes. all kits include a vent kit.
Thanks everyone!

The EBMC/Keefer Design billet fuel filler kit for 67/68 Camaro's is ready to ship
 

The EBMC/Keefer Design billet fuel filler kit for 67/68 Camaro's is ready to ship. Hear is a pic of the kit. Some modifications to the rear are necessary. We are hear to help you.

Universal kits are also now available visit our web site to place your orders.

http://www.keeferdesign.com/

What modifications because I am about to order one.

Thanks Mike
All you have to do is use the supplied gasket as a template, enlarge the opening to 3" (carbide bit works well) and drill 4 mounting holes.

If that is all I have to do, then I wish the rest of the car was that easy.

You and me both! This is for sure one of the easier upgrades out there.

One of the uses we came up with is using the large diameter filler with our universal mounting ring. The bolt pattern is the same as your typical fuel cell mounting ring and slips right over the studs.

http://i864.photobucket.com/albums/a...ps1b738e79.jpg

Here we used it for an intercooler reservior fill for an LSA powered 70 Chevelle EBMC is currently building: (yeah I know we need a build thread on it! lol)

http://i864.photobucket.com/albums/a...psa93c2cc1.jpg

http://i864.photobucket.com/albums/a...ps63d8e4c2.jpg

Thanks foe everyones support!
www.keeferdesign.com

Uhhhh...yeah!!!: :twak: :twak::twak: :twak:

lol! yeah we have quite a few builds no one really knows about....yet!