67 camaro questions
 

we have never done a camaro so i have a few question .
i have a coustomer with a 67 coupe , 10 bolt rear , smallblock ,auto.
questions
#1 what is the widest rear wheel that will fit in the stock tubs .
#2 if we put dse tubs in it can we fit a 20x10
#3 and has anyone used airrides rear bolt in kit .

thanks for the info .

hey bud!!!! lol
 

1.275- 285 rear tire with stock tubs
2. yes a 20x10 will fit with dse tubs, i think killer 69 used a 20x12 on the car he just finished
3. how the hell can it be pro touring with air ride!!!! lmao, jk
i am not sure about #3
jake

jake , you worthless pile of dogs##t , i was hook line and singer . :hail:

im quite sure Killer69 didnt use the DSE kit
not 100% sure but remember him saying next time he will use it

either way
 

i was using that for reference, i guess it was not a good example, but yes a 20x10 should work with no problems

Kenny, you can put 20 X 12 a,d 345/25/20 on the DSE tubs if you go deep and do not use leaf springs

Width doesn't seem to be a problem as much as height. We had to make our own tubs and did quite alot of "clearancing" to get the 295/40/20's to fit at our ride height.

I'd go with the DSE quadra-link or the Lateral Dynamics 3 link for the rear.

We ordered all of our parts the other day........for the camaro

18's 20's
art strong arms and shockwaves for the front
art air bar set up for the rear w/shockwaves
Bear Brakes on all four corners
etc etc


we also desided not to minitub it thanks for the input! :thumbsup:

http://introwheels.com/gallery/album01/scott_s_cars_012

I don't know what size these are but they look huge!

[QUOTE=GeorgeO924]http://introwheels.com/gallery/album01/scott_s_cars_012

I don't know what size these are but they look huge!


Those are 22's.

What did you do for rims...
 

You are not going to get a 10 inch wide rim work. Friend has 68 convertible with 17 by 10 with a 275/40/17 tire and they rub a slight amount on big bumps running just leafs. With the air ride I think it will do the same unless you clearance it in more than a few areas. 68's are about 1/2 to 3/4 of an inch more narrow on each side than a 69.

If you are gong to run it low with 20's, I think you will need a 9 inch wide with a 265 width tire.

On my 69 with the fender lip trimed I could not get a 285/19 to work without a slight mini tub...and again the 68 is more narrow

any build pics for us KD? :D