Anvil's Biggest Carbon Blem Sale Ever!
 

Item Location (City/State): Rancho Dominguez, CA

Price: Various

Description: Anvil Auto is starting off the new year by purging its old inventory of parts including some blems with discounts that will never be seen again! If you are painting part or all of the parts we have for sale, or just have a lighteight race car, this is your chance to aquire some of our lightweight carbon fiber parts for never seen before,unbelievably low prices. We have several 1st gen Camaro header panels that aren't at the right angle (when looking from the rear or front). They can easily be fixed by cutting a verticle line in the back and then gluing back together. We've already made the cut in some, but we just don't have the time to repair them. These start at just $35 each! We also have some 1st gen and 2nd gen Camaro hoods with various blems including weave imperfections in certain areas, gel coat build up in corners and some warped hoods. We've been able to de-warp most warped hoods and we can e-mail you instructions on how to do so. There are also some interior parts like A-pillar moldings and instrument panels where some parts have barely noticable flaws for 15%-20% discount to some that are cracked and have very noticeable flaws for as much as 80% off. The damaged ones could be fixed and painted. We also have some blem spoilers left with similar flaws as the interior parts. Please call us on our toll free number (888) 723-8882 to inquire about what we have left and pricing. Pictures can be sent by request. It doesn't make sense for us to pay to keep these parts in our warehouse, so we are losing money by keeping them month after month. Our loss is your gain! While supplies last!

I will call you guys next week about some other panels~:thumbsup:

Left you a voicemail. Thanks!

Tim at GAP spoke to you guys Friday for something for my car. :) looking forward to it!

William

Nothing for 68-72 novas?

Anything for 72 chevelles?

Anything for 69 Mustang?

We have a couple vent delete cowl panels, 1 instrument panel and some B-pillar moldings.

What do you have for a 69 camaro?

We have some deck lids, quarter panel extensions, passenger's side dash cove panel, and one set of mirrors.

Several cowl hoods, a couple deck lids, some header panels, various A-Pillar moldings, instrument panels, rear spoilers. (some exterior panels could be used for exposed carbon stripes and some would just be for painting).

Will the voice mails left be replied to or will we need to call back? Im looking for a flat 2nd gen hood, deck lid, filler panel and soiler and also a guage panel for a 72 nova. any idea if you have these and a price?

Thanks
Brandon Slater

66/67 Chevy II parts?

A soiler? I've got one of those at home; that's what I call my 4 month old daughter...but seriously folks!
We have one 2nd gen flat hood, no deck lid blems, 1 filler panel and a 1 pc. soiler, I mean spoiler. I also have 1 Nova instrument panel. The Camaro hood and spoiler are mostly just for paint with no exposed carbon, so they would be at least 50% off, the other parts aren't as bad and would be more like 15%-20% off.

All voice mails will be returned in the next couple of days or so. We have had an overwhelming response to this sale, so please bare with us. Thank you!

I would like to call dibs on the sec gen flat hood. I planning on painting it. what style is it? 100%, 50/50 or dry?

as for the spelling I have fAt fingers lol

Anything for a 69 chevelle? :y0!: :y0!:

Pm sent

No problem.

The flat hood is a carbon/fberglass with a glossy finish.
PM me with your name and contact number and we'll call you. Thanks!

PM and voice message left.

Thanks

any 70 chevelle hoods?

Can you please pm pricing for cowl panel Insturment panel and bpillar pleas.

Sorry, no.

Please PM price for 68 Camaro A Pillars

Anything for 2nd gen Firebird?

We have a 70-73 Formula hood that has a white mark down the center 35% off, a tail panel that is very foggy for 60% off, a rear filler panel with the weave going in the wrong direction for 20% off, a set of T/A fender vents with white spots and some gel build up on the edges for 40% off.

How much for the cowl panel for 68-72 Nova?

What is left for 2nd gen Camaros?

20% off regular price of $299, which would be $239.20 We only have two and the they just have some minor surface scratches on them. They can easily be clear coated or painted and polished.

We have a couple power bulge hood blems left. We have 100% one, the only thing wrong with it is the weave is a little uneven on either side of the bulge, so that would go for $1500. I have a slightly warped (could be de-warped with a little work) carbon/fiberglass hood that I could let go for $495 (normally $995) or one with weave imperfections and white haze for the same price. We have a one pc. rear spoiler that is warped for $50, and insturment panels with various problems from $35 on up, and various A-Pillar moldings from %10-%35 off. Also have a couple carbon fiber radiator close out panels we will sell for the cost of our fiberglass ones ($299) which won't last long. Call us during the week. for details and availability.

Matt,

Do you have any lower valances for 67-68 Camaros?

Thank you

Who should I talk to when I call on Tuesday?

No, sorry, not at this time.

67 Camaro A-pillars?

These people produce amazing parts. I'm extremely satisfied.

Interested in Carbon Mirrors for 69 Camaro, Rear notch Carbon Spoiler, Front Lower Carbon Spoiler, Or Maybe Front Notch Spoiler.

We have one set left of regular (without driver's side guage pods) that has some chips on the ends. Call for more details.

We have 1 rear notched spoiler that may be spoken for a regular front spoiler and only non-blem front notched wrap around spoiler. We have plenty of regular rear spoilers, hoods, header panels and a few A-pillars with gauge pods (driver's side only). We can make anything on our site to order which can be done by calling us and placing an order with a deposit.

67 Camaro!
 

Would be interested in the header panel and a flat hood for a 67 Camaro!

If you can show me how to fix them too!

Michael

Sorry, we don't have any flat hood blems, but we do have some non-blems and several blems in cowl induction hoods (now 40-75% off). We also have several header panels that are easily fixed which I will sell at 60% off! I can tell you how to fix them. So simple, a cave man can do it.