Stainless Works LS Swap Headers
 

Item Location (City/State): Greenwood SC

All In Stock Headers Are Sold but I have more on the way so let me know what you need

I am a dealer for Stainless Works so if there is something else you are interested in please PM me and I will take care of you

Jeremy, what kind of ground clearance do these provide? I've seen hookers give a lot of clearance on the 69 camaro and was wondering how these compared to them.

I used to have hooker supercomps for small block chevy, and upon switching to an LS I picked up the Stainless Works for Wayne Due, as pictured above.

Ground clearance is better than the hooker supercomp, but I did need to clearance the trans crossmember.

Ground clearance is the best I've seen with any other brand. I can email pics if you pm me your email address

Thanks for the reply. Was this with a stock subframe and a stock crossmember?

Thanks Jeremy, PM sent.

Pics sent

Got the photos Jeremy, thanks. What size are these?

Disregard my last. I looked them up on the website and saw they are 1 3/4. I'm putting in an LSX454 and was looking to get 1 7/8 size. However, I'll make some phone calls tomorrow. I'll let you know.

I sold a set of the CVLS1 Chevelle LS1 1968-72 Headers: 1-7/8"
to a guy and he used them on a 69 Camaro with a LS with no problems

Aftermarket - Wayne Due subframe, and whatever aftermarket crossmember came with my trans - can't remember the brand.

Getting the crossmember to clear was super easy though.

Thanks for the replies guys. Jeremy, I would at least need 1 7/8 but not sure if that will work with a stock steering box as I was told that it's extremely tight. The other issue is I haven't decided if I'm keeping the stock sub or going aftermarket. Guess I have to decide that first before buying an exhaust system. Sorry, it looks like I jumped the gun a little.....

That's cool man just remember me when you are ready

Will do Jeremy, thanks. GLWS

How do the turbo upward headers fit in a stock subframe with the ls engine. I'm thinking about ordering a set for my turbo kit and I'm curious before I build a set

This interest me. On a DSE Frame?

Header Ground clearance
 

Jeremy,
I've been searching for some headers but ground clearance is a premium for me....I'm using a DSE subframe on a 67 camaro and need 1 7/8" primaries....any good pics showing ground clearance?

I'm not sure I have never used the turbo headers
He used the 1 7/8" headers on a stock subframe
Stainless Works don't have a 1 7/8" header that fits a DSE subframe

Stainless Works will have a price increase January 1st so once these headers are gone I want be able to sell them this cheap anymore so get them while I have them!

Hey Jeremy, I'm interested in a set for 69 Camaro. What mounts do they work with.

does the CALS1SB work with the true turn? how about mechanical clutch linkage? (factory subframe)
I would also be interested in seeing a pic of the ground clearance if anyone has one?

Yes they work with Tru-Turn, I can send you some pics if you pm me your email address

Stock subframe with the CALS1SB headers

http://i271.photobucket.com/albums/j...psrvnbwzrs.jpg

http://i271.photobucket.com/albums/j...ps3tr9a9pz.jpg

Jeremy, i sent you an email back....... those look like the oil and trans pan hangs lower than the headers...........
I LIKE!
thanks!
:ups: :ups: :ups: :ups: :ups:

Only have 2 sets of the CA679WD headers left in stock and when these are gone the price goes up so order now for this price. Any other Stainless Works headers I will be glad to order for you at a discounted price.
Thanks everyone for the continued support, looking forward to a new year!!

Awesome!
 

Just wanted to say I just received a set of these for my 68 Camaro with AME subframe and they are not only a work of art but fit perfectamundo!! I love them! Thank you Jeremy for the fast professional service!

Will they work on speedtech clip?

Sent you a PM

I just started to collecting the parts I will need for an LQ4 with LS3 heads + 4L80E tranny.
It will go into a 72 Nova with stock subframe and a Lee steering box.
I am looking for a set of 1 3/4" headers. Do you have something for me?

Yes you will need the CALS1SB and I would be glad to order you a set