Brembo GT 6 piston fr / 4 piston rr monoblock brake kit FS
 

Item Location (City/State): SoCal

Price: $4000 plus shipping

Description: See below

A little over a year ago I bought this kit from forum member Frank 4musclemachones:

http://www.corvetteforum.com/forums/...locks-f-s.html

The kit has been stored indoors, never installed and in the exact same condition as received and in the ad. I was told the kit had 500 miles on it, and it looks to be correct. It was a 1/2 price smokin' deal, but I'm going a different route.

Asking $4000 plus shipping.

Feel free to PM, email at [email protected] or dial eight one eight - 425 - twentyfive 74.

Thanks for looking :cheers:

Ron-

I'm interested. Toasted my 12.19" Wilwoods at Thunderhill, so the 14" rotor is appealing.

What would I need to run these on my 69? Stock front spindles and a 12 bolt with C-clip eliminators. Is this just the calipers, rotors and lines, or are there brackets as well?

Thanks,
Jason

Hey Jason,

They come with radial mount brackets front and rear. These bolt up to c5 / c6 spindles so you'd need Tobin's magic brackets in the front. Piece of cake. Rears I cannot comment with certainty, but again it's made for a Corvette so I'd bet Tobin has something.

Give me a call and I'll work through it for you :cheers:

Ron

Hi Ron,

I have weld on caliper brackets that will get these rear calipers mounted to ANY housing with a 3" axle tube. Most likely you will need a different hat with a deeper offset though. Hope this helps.

Jay

Thanks Jay!

Payne, your spindles are 2nd gen based and modified by Global west. I have a 2nd gen C5 adapter bracket to try.
I can also get the rear backings to work on 12 bolts.

These are a great deal.

Thx Vince! :thumbsup:

Ron is correct in his description except that all of the rotors are brand new!

So it's an even better deal at the price he's asking. :)


Sent from my iPhone using Tapatalk

Thanks Frank. Hope you're doing well buddy!

I've been getting some questions regarding compatibility of the Brembo GT kits that Ron is selling, so with his permission, I figured I'd post a response here for everyone's benefit.

Since the GT kits are designed to fit a C6 corvette (base, Z51, Z06, etc), they should be compatible with any C5 or C6 application since the mounting points are the same. Hose fittings vary from M10x1 bubble on the C5 to M10x1 inverted flare on the C6, but otherwise they're virtually the same with respect to their mounting requirements.

So with that said, if you'd like to put these brakes on your muscle car application, it should just be a matter of making your car look like a C5/C6 Corvette with respect to the brake mounting points, which is precisely what we do. We offer C5/C6 conversion brackets for a variety of applications front and rear, with or without parking brakes, not all of which are listed on our website, so please feel free to contact us directly with any questions that you may have for your specific application.

GLWTS Ron!

Regards,
Tobin Knighton
KORE3 Industries
541.924.5673
[email protected]

Tobin you are the man! Always there for us. Thank you for the great service to our community :cheers:

If you are willing to seperate front and back I would be interested in the fronts?

Thanks for the offer, but I would prefer to keep the kit whole at this point.

May want to list these on the Corvette Forum as well.

Thanks PK. They're there.

Ron, I'm surprised these haven't sold yet but if you get tired of them in your way just send them over to me and I'll store them for you :hello:

Do these have the in rotor parking brake?

I could see these on a Monte SS soon.

Grendel give me a call at 818-425-2574. No parking brake is included, but the kit is made to work with a GM e-brake set up. Easy enough.

:cheers:

FedEx tracking on the way Rick. Of course, you won't be able to read it for a few weeks :D

Hope you're healing well Brother! :cheers:

I'll call after work today. Maybe I should put these on my Camaro. (it will have a C6 front end and 5th gen Camaro rear).

Tobin makes a kit with all the parts to install the parking brake for those I just bought it for my C6 Z51 brake kit.

I already have Big Mock's shipping address :cheers:

Thanks Wayne :thumbsup:

He doesn't want to play with brakes... or the Baer 6P's I bought for it would be going with it.

Granted, I can probably put the 6P's on the Monte with a little bit of work.

brakes
 

Wow great deal someone buy my grand sport brakes I want these!!

Do you have any pics you can post?

Here's a few from my pbucket:

http://i885.photobucket.com/albums/a...ps2f8b5f05.png

http://i885.photobucket.com/albums/a...ps56b5fe37.png

http://i885.photobucket.com/albums/a...ps72d705c2.png

http://i885.photobucket.com/albums/a...psfd3a4d12.png

If that doesn't make someone pull the trigger I don't know what will. Thanks

^ Thank you Sir!

Do you know the dimensions of that rear stanchion?

It looks like they would fit a gen 5 Camaro rotor and internal ebrake.

I am almost off the fence :)

Oh just buy them already :poke:

I know! :D

These will sell today :cheers:

Brake kit is sold. Thanks Tobin, Frank and all who expressed interest. It was a lot of fun talking about how we could make these work on different platforms!

Lat-G rocks :cheers: