Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Parts for Sale (https://www.lateral-g.net/forums/forumdisplay.php?f=18)
-   -   Time Has Come to Sell!!! (https://www.lateral-g.net/forums/showthread.php?t=48477)

badazz81z28 12-15-2014 03:01 PM
70-81 Camaro Parts! Time Has Come to Sell!!!
 
Please Delete.

Rick D 12-15-2014 03:09 PM
TK0 price??

grif54 12-15-2014 03:42 PM
Where did the steering box come from? What ratio is it? I have a 71 Chevelle, I think it will work but not sure. Do you know? Thanks.

Vince@Meanstreets 12-15-2014 03:56 PM
Quote:
Originally Posted by grif54 (Post 585534)
Where did the steering box come from? What ratio is it? I have a 71 Chevelle, I think it will work but not sure. Do you know? Thanks.
Yep it will work, you'll have to get a new rag joint for it. You can re use your power steering pitman arm.

CamaroMike 12-15-2014 04:32 PM
is the brake set up front and rear?

31069ss 12-15-2014 04:56 PM
Tko price as well im
Not too far from you

simbad's68 12-15-2014 05:16 PM
X2 on the gear box ratio. I beleive it will fit a fist gen as well with a new rag joint.

grif54 12-15-2014 06:24 PM
Thanks Vince. Appreciate the info.:thumbsup:

badazz81z28 12-15-2014 06:49 PM
Quote:
Originally Posted by grif54 (Post 585534)
Where did the steering box come from? What ratio is it? I have a 71 Chevelle, I think it will work but not sure. Do you know? Thanks.
Its for a 70-81 Camaro. Its this one:http://www.rickscamaros.com/camaro-6...1970-1981.html

I bought it from Rick's Camaro

badazz81z28 12-15-2014 06:52 PM
The KORE is only for the front. The TKO alone is $2000, it has about 2500 miles on it. I had a tremec dealer go thorugh it and install carbon fiber rings in it last sumer (cost me $600). I will throw in the tremec to LS quicktime bell for another $350

BanditDave 12-15-2014 08:24 PM
What is included in the Ricks tank. Very interested! Pics if possible.

grendel 12-15-2014 08:32 PM
Quote:
Originally Posted by badazz81z28 (Post 585563)
Its for a 70-81 Camaro. Its this one:http://www.rickscamaros.com/camaro-6...1970-1981.html

I bought it from Rick's Camaro
I will take it, if it doesn't step on anyone's toes.

PM me your PayPal address.

Carbo 12-15-2014 08:42 PM
What hydraulic setup are you selling? Also interested in the QT Bellhousing. Any photos???

badazz81z28 12-16-2014 08:30 AM
Quote:
Originally Posted by BanditDave (Post 585576)
What is included in the Ricks tank. Very interested! Pics if possible.
Ricks Tank, 255 Walbro in-tank pump, 0-90 OHM sender, I have no use for the Corvette Filter/Pressure reg if you want that,

I will get pics of the pump and the tank


Edit, I had Rick move the out/inlet (not seen below) to clear the tank strap.
http://i19.photobucket.com/albums/b1...1z28/Ricks.jpg

BMR Sales 12-16-2014 10:28 AM
Can't believe someone didn't buy the whole car!

Mac&Otto 12-16-2014 11:44 AM
Fuel tank
 
Quote:
Originally Posted by badazz81z28 (Post 585530)
Item Location (City/State): Edwards CA

Price: Varies

Description: Sec Gen Camaro Parts!


Lets start selling, Tell your friends...Nastyz28.com


1975-81 F-body Rick's Stainless FI Tank, Notched for mini-tubs, Walbro 255 upgrade. Asking $1000

GM 600 Steering Box, less than 1000 miles on it. Plated, cost $570! Comes with hardware. Asking $400

KORE3 C5 set-up, Spindle, Hubs, Brackets, and solid spacer upgrade. All you need is rotors and calipers. New from KORE3 would be $550 and you get already modded spindles! asking $600

TKO 600, carbon fiber blocker ring upgrade, Quicktime Bell, Hydraulics etc.
Can you tell me the difference between the 70-73 tank vs 75-81?

Thanks., Cal

Mac&Otto 12-16-2014 11:49 AM
Quote:
Originally Posted by Mac&Otto (Post 585633)
Can you tell me the difference between the 70-73 tank vs 75-81?

Thanks., Cal
Sorry, the photo didn't show on my iPad at first, now I see the configuration is considerably different.

69 muscle 12-16-2014 01:02 PM
what spline input on TKO?

badazz81z28 12-16-2014 02:31 PM
Quote:
Originally Posted by 69 muscle (Post 585645)
what spline input on TKO?
26 spline input, big output ( I think 31 spline)

The 70-74 tank is flat on top. The 75-81 capacity is bigger hence it has a hump on the passenger side.

badazz81z28 12-16-2014 03:00 PM
http://i19.photobucket.com/albums/b1...ps6dd22384.jpg

grendel 12-16-2014 05:41 PM
Hi, steering box? How do you want your money, if it's to me?

badazz81z28 12-16-2014 05:58 PM
Quote:
Originally Posted by grendel (Post 585687)
Hi, steering box? How do you want your money, if it's to me?
Sorry about that! PM sent.

grendel 12-16-2014 07:29 PM
Quote:
Originally Posted by badazz81z28 (Post 585691)
Sorry about that! PM sent.
Money sent for the Delphi 600 box.

glassman 12-16-2014 08:25 PM
BTw, i sent my Ricks tank back to them to take care of some issues, I shipped it after i rinsed it out with soap and water(twice), cost about a 100 to send it back to them. If somebody wants it, its not too bad to do ( i had almost no smell left and 0 chance of flare up, and i plugged the holes with foam/rags).

badazz81z28 12-16-2014 08:28 PM
Quote:
Originally Posted by glassman (Post 585711)
BTw, i sent my Ricks tank back to them to take care of some issues, I shipped it after i rinsed it out with soap and water(twice), cost about a 100 to send it back to them. If somebody wants it, its not too bad to do ( i had almost no smell left and 0 chance of flare up, and i plugged the holes with foam/rags).
If someone wants me to ship it and peform the above, I can do that

Rob

badazz81z28 12-17-2014 08:40 AM
PS Box Sold!

badazz81z28 12-18-2014 07:48 PM
Buehler....Buehler...Anyone interested else? :y0!:

badazz81z28 12-24-2014 09:35 AM
X-Mas Eve Bump

badazz81z28 12-26-2014 08:12 PM
Transmission sold


All times are GMT -7. The time now is 09:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net