1967 c-10 by Ambition Road
 

This 67 c-10 will be a full build for us. It will be a pro-touring/daily driver featuring a RS REVO front and rear suspension, 525hp LS3 connect and cruise w/4L70e trans, and of course Vintage Air.

Pics

Dynamat between headliner and roof skin

Dynamat roof skin

Squared up bed corners for flush mount toneau cover

Looks like a nice start. Got anything else to go with the cab? Got one of these in the corner waiting in line. Be watching for the rest of this build.

Slick work!
 

Like the dynamat in between the pieces

I'll be watching this one too!! :drool: :popcorn2:

Subscribed

Going to be a very tight fit where the roof rolls down to the door, Just did it on a truck in our shop.

I was prepared to remove a strip from each of the beads if nessesary but it wasn't a problem at all.

It's starting to look like a truck again. Got the bed and cab mounted and aligned, now on to fitting the doors and front sheet metal.

That's what I'm talking about. Looking good there all bare, fresh and clean. Keep it rolling.

Making steady progress on panel fitment and gapping

Gaps

gaps

DSE selecta-speed wiper kit

Wiper motor installed

Great work! Keep it up.

Great work Aaron...really enjoy seeing this truck come together. :thumbsup:

In for the project.

Rite on
 

Where in Mooresville are you guys located. Nice build

Thanks. We're on Lugnut Lane across the street from Kurt Busch Inc.

Very nice work. :thumbsup:

Awesome truck. I talked to the Owner the other day and one of our steering wheels is on its way out there for it.

Thanks Jay! The wheel looks great

We used Porterbuilt hood hinges then used custom gas shocks. This setup works really smooth.

Fabricated bed cover, steel frame with custom ordered one piece aluminum.

Roadster Shop bolt in REVO front suspension.

Tire fitment, getting ready to order wheels!

Roadster Shop 4-link with 335/20's in the rear, 275/19's in front

Aaron great progress and I looked at your site and it looks like you have a few more cool projects going.

Keep posting pics and I am looking forward to seeing this one on the ground as a roller.

RS states it fits a 315 tire. Looks like there is plenty of room for a 335 with that kit.

Love old trucks like this!!! Definitely watching this build!

Raised wood bed floor and stock tubs widened

Minor tweaks to the dash, but overall staying with a stock look.

Rushforth 20"x12" and 19"x10" wheels in a brushed/smoked finish.

On the final stretch for fab and mechanical! We'll hopefully be starting bodywork within a few weeks.

Very cool build Aaron. :thumbsup:

Yes it is Skip,I really want one of these trucks:thumbsup: :thumbsup: