1968 Camaro Project /roller SW/ California car
 

Item Location (City/State):Las Vegas, NV 89131

Price: $14,000 obo with all new parts listed now FIRE SALE!! $12,500 for everything!!! FIRM!! SOLD!!

Description:
I have decided to let go on this car and focus on getting my shop built
I had planned on another pro-touring build, but plans / finances changed

I have a nice 68' Camaro that was originally a V8/ powerglide car, PS, no-A/C

The previous owner had the rear quarters replaced (80%) and trunk pan, this is a desert car and still has the original outer wheelwells, original floor pans, front inner wheel wells , Radiator core support w/ radiator, hood latch & support, Cowl panel , firewall heater box (as well as inner heater box and stock controls), original window trim moldings , front & rear bumpers, stock subframe w/ PS box and steering linkage,etc

The car only has surface rust on floor pans with two small spots on drivers front that go through, other than that, no rust

It has both front bucket seats and rear seats, seat belts, auto floor shifter, std floor shift steering column, front and rear original glass, drivers and passenger sides door and quarter glass w/regulators /tracks
set of (4) 15x7 Rallye wheels, 10 bolt rearend w/ mono leafs

the car includes front sheetmetal, all Brand New In Boxes from Classic Industries:
- Right & Left Fenders w/ lower extensions
- Header panel
- Lower Valance Panel
- SS steel Hood
- front and rear spoilers

California Title (old pink from 87' signed over in 95')

can take and send additional pics

BODY:
(New Front sheetmetal has just been bolted on car):

Left and Right side Front Fenders w/ lower extensions
Front Header panel
Front Lower Valance panel
SS steel hood


Rear Spoiler
Front Spoiler
Small Block Fan Shroud W/AC

FUEL SYSTEM:
Fuel Tank Mounting Strips
Fuel Tank Neck
Fuel Tank to Filler Hose
Gas Tank Anti Squeak Inserts
Gas Tank Neck Sleeve
Sending Unit Gasket-small
Sending Unit Locking Ring-small
Fuel Tank Strip Mounting Bolts
Fuel Tank 67-8
SS Camaro Gas Cap

INTERIOR:
Deluxe Steering Wheel Kit
Black Carpet Kit
Blk A-Pillar post pads (pair)
PUI 68 Deluxe Blk Rear Seat Side Panels
Blk Dash Pad
68 Blk Deluxe Front Door Panels
68 Black Houndstooth Cpe Seat Upholstery Cover set
Complete Vintage Air kit for 67-8 Camaro ( minus compressor, going LS engine)
Vintage Floor Mats-Black
68 Tic-Toc-Tach 5500rpm Tachometer Assembly
Blk Package Tray Cover
Blk Headliner Kit
Headliner glue kit
Upholstery Hog Ring Pilers and set of Hog Rings (for seat cover install)
X-Body Black Console Gauge Assembly
68-69 Deluxe Front and Rear Seat Belts (5) complete car kit
Center Horn Cap Mounting Ring
Turn Signal Cams
Center Air Vent Assembly
Window Handle Crank Plate x4
Rubber Seat Back Stopper Kit
Deluxe Inner Door Handles
68 complete interior screw set
Door/Truck/Glove Box Lock Set with Original Keys
Bucket Seat Bracket Covers
68 Deluxe Seat Emblem Kit

FRONT SUSPENSION:
Upper Control Arm Bushings
Lower Control Arm Bushings
Outer Tie Rod Ends
Inner Tie Rods
Stabilizer Link kit
Upper Ball Joints
Lower Ball Joints

ELECTRICAL:
American Autowire Classic Update full car wiring harness kit
Ignition Switch Lock
Ignition Switch
Head Light Switch Assembly
Windshield Wiper Switch

BODY COMPONENTS:
Body Upper Door Jamb Seals
Deluxe Felt Kit With Deluxe Interior
Roof Rail Weather Stripping
Door Frame Weather Stripping
Hood Louver Gasket
68/9 Camaro Deck Emblems
68 350 Front Fender Emblems RH&LH
68 SS Front Fender Emblems
68 Standard center grill
67/8 Speedo cable
Poly body mount bushing kit -black
SS Grill Emblem

Buyer arranges shipping
In Las Vegas, NV

pm/ call/ text (702)677-4085

Here Is The UPDATE Parts list that is available with the car for $12,500 FIRM!! SOLD!!! all new in boxes / packages




Attached Images Attached Images

Hate to see you selling this, but hey...gotta do what you gotta do to fund that shop build.

For anyone wondering...I've seen the car numerous time and it's solid. If I wasn't in the middle of building my 67, this would be mine in a heart beat.

I bolted all the new front end sheet metal and SS hood on it today!

I'm amazed this is still around, seeing how in demand these are!

Same here!

Most of the ones you see out there are rusted out and cut up


Jeff

Funny you mention that. I was surfing the net looking at projects and cars for sale (nothing better to do) and was amazed at how expensive and how crappy the bulk of cars are. I actually think you're under priced based on what I've seen.

I understand that I am advertising it in a short period that isnt great for most (after christmas and before tax returns!)
I was going to list all the new parts that I have for the car also and offer it as a package deal

Everything is brand new in boxes from Classic Industries

BODY:
(New Front sheetmetal has just been bolted on car):

Left and Right side Front Fenders w/ lower extensions
Front Header panel
Front Lower Valance panel
SS steel hood


Rear Spoiler
Front Spoiler
Small Block Fan Shroud W/AC

FUEL SYSTEM:
Fuel Tank Mounting Strips
Fuel Tank Neck
Fuel Tank to Filler Hose
Gas Tank Anti Squeak Inserts
Gas Tank Neck Sleeve
Sending Unit Gasket-small
Sending Unit Locking Ring-small
Fuel Tank Strip Mounting Bolts
Fuel Tank 67-8
SS Camaro Gas Cap

INTERIOR:
Deluxe Steering Wheel Kit
Black Carpet Kit
Blk A-Pillar post pads (pair)
PUI 68 Deluxe Blk Rear Seat Side Panels
Blk Dash Pad
68 Blk Deluxe Front Door Panels
68 Black Houndstooth Cpe Seat Upholstery Cover set
Complete Vintage Air kit for 67-8 Camaro ( minus compressor, going LS engine)
Vintage Floor Mats-Black
68 Tic-Toc-Tach 5500rpm Tachometer Assembly
Blk Package Tray Cover
Blk Headliner Kit
Headliner glue kit
Upholstery Hog Ring Pilers and set of Hog Rings (for seat cover install)
X-Body Black Console Gauge Assembly
68-69 Deluxe Front and Rear Seat Belts (5) complete car kit
Center Horn Cap Mounting Ring
Turn Signal Cams
Center Air Vent Assembly
Window Handle Crank Plate x4
Rubber Seat Back Stopper Kit
Deluxe Inner Door Handles
68 complete interior screw set
Door/Truck/Glove Box Lock Set with Original Keys
Bucket Seat Bracket Covers
68 Deluxe Seat Emblem Kit

FRONT SUSPENSION:
Upper Control Arm Bushings
Lower Control Arm Bushings
Outer Tie Rod Ends
Inner Tie Rods
Stabilizer Link kit
Upper Ball Joints
Lower Ball Joints

ELECTRICAL:
American Autowire Classic Update full car wiring harness kit
Ignition Switch Lock
Ignition Switch
Head Light Switch Assembly
Windshield Wiper Switch

BODY COMPONENTS:
Body Upper Door Jamb Seals
Deluxe Felt Kit With Deluxe Interior
Roof Rail Weather Stripping
Door Frame Weather Stripping
Hood Louver Gasket
68/9 Camaro Deck Emblems
68 350 Front Fender Emblems RH&LH
68 SS Front Fender Emblems
68 Standard center grill
67/8 Speedo cable
Poly body mount bushing kit -black



Thanks, Jeff

bump

Updated with added parts list available with car as package also

Tax Season guys! Start to spend your returns!!
Price is OBO!!

Curtis, what's wrong with building two....Just ask John :lol:

Jeff post it up on camaros.net ... it'll sell quick there!

It's so tempting.

Ron
Team Camaro doesnt seem to get alot of traffic compared to how it used to be
I checked there but maybe I will look at it again

Thanks Jeff

Do it Curtis!
You know it will be cheap for you!
Ah, but wait, I will busy helping you build it too!

Put that L76 that I built for your 67 in this, then I can build that stroker 425 you want for the 67

Parts pics!!

more parts

Where was this car when i was cutting the floors, quarters, and every other panel off my car and replacing them!

Good luck with the sale, if I didn't already have a 68 sitting in Vegas I'd be tempted.

Price Drop!!

bump it up and let's get it sold!!

Is this still available? I'll need a little time to look at everything you listed and talk it over with my husband.

Are there any major issues that I would need to know about. It also looks like you were trying to restore to original, is that correct? Also, I see it says it's a roller with no engine or transmission listed. Is there anything in the engine bay? Could I get pictures of the engine bay and on the underside of the car? Out off all the parts listed, are they all in the packaging except the new front sheet metal?

I may have more questions once I look more into what you've listed.

I'm in northern Nevada (Winnemucca) so I would need to figure out how to get it up here.

Thanks,
Heather

Heather,

Yes it is still available.

There are no issues with the car, needs restoration
I was going to build another pro-touring car / shop car, to show my work
The parts came with the car when I purchased it.
You are correct, no engine or trans.
The engine bay has small block frame mounts and trans crossmember
I will post additional pics you requested
And, yes, the the new parts are in their packaging/ boxes (besides new front end sheetmetal bolted on car)

Please let me know if you have anymore questions or need additional pics

thanks, Jeff

requested engine bay pics I just took

Thanks, Jeff

Thank you. It looks like more work than we are willing to take on at the moment.

Jeff,

After looking around some more, we may still be interested in your car. I have a few more picture requests. Can I get a better picture of the spot on the passenger side rear quarter panel, near the door handle area? In the current pictures, it looks like it needs some work and we are trying to determine what kind of work would be necessary. Could I also see pictures for the floor pan and the cowl tag?

Thanks!
Heather

Heather,

I will take a bunch of pics that you requested early tomorrow morning

I do have some of the floors that i will add now
The spot on the pass quarter in where some of the body filler is missing from when seam filled when quarter panel was installed years ago
I am no t a body guy, but I would imagine that any body person would want to get it back down to metal and prep it themselves
The body work was done years ago, then primed, but the desert sun and heat did put hairlines in some filler spots, but better than rust! LOL

Thanks, Jeff

Thank you for the pictures of the floor pan. Looks like the back floor pan is in decent shape, but the front (especially the driver side) may need full replacement including the toe board. Difficult to tell on the passenger front, but do you think that would need to be replaced as well? Looking forward to seeing more pictures.

Thanks,
Heather

Heather,

I would say that 85-90% of the floor is in great condition

Remember that the car is 48 years old, so to find a pristine floor pan/ car is rare

The drivers front area where your heel would be is the only trouble spot
the toe boards are good, just surface
I was planning on getting the repair section for the drivers front and cutting out around the factory lines and trimming new piece and installing, then coat entire floor pan

Here are some more pics that i just took

Please let me know if you need additional ones

thanks, Jeff

Are you able to see how thick the body filler is where it cracked on the passenger side? I'm also not really sure why you would need filler there unless that just happened to be where the weld seam was, any ideas? Were you able to get a picture of the cowl tag?

Thanks for all your patience with me. I am new to looking into buying a car like this and want to know what I'm getting myself into.

Heather

Heather,

it is approx 1/8" and it is over a welded seam from 80% quarter panel install

No pics of cowl trim tag, due to it was missing since I have had the car
The 68 trim tag doesn't really tell you much info (unlike 67' or half of 69' cars) just paint, interior colors, build date

Thanks, Jeff

Jeff,

Thank you for all the additional information. I'm discussing everything with my husband.

Heather

Any pics


Sent from my iPhone using Tapatalk

?????

Have you gone through the 4 pages of this sale thread? It is loaded with pics

If you need any others that aren't already shown, let me know

I do have a sale pending right now, just waiting on funds

Thanks, Jeff

I didn't , this tap talk app doesn't show the previous pages so I will log in on my computer sorry


Sent from my iPhone using Tapatalk