65 Pro Touring build
 

Thought I would show my progress of my project, been following a lot of builds so I figured I might as well show mine.

https://i.imgur.com/JhqTz3t.jpg

Your pics didn't come through. Would love to see them...

Speedway gcomp front suspension mocked up.
https://i.imgur.com/8R8gyAk.jpg

Custom built rear 4 link with a ford 9" 3.73 gears and a detroit locker.
https://i.imgur.com/l6ZxYKY.jpg
https://i.imgur.com/xFd1Vch.jpg

Running CTS-V brakes front and rear on custom brackets from big brake upgrade along with his billet spindles
https://i.imgur.com/iIAMhj5.jpg
https://i.imgur.com/d1myF0k.jpg

Looking good. Didn’t know if you saw my answers to your questions in PM?

My front calipers just came in today, I need to send the rotors out to have them opened up to fit the billet hubs.

https://i.imgur.com/LMHEIB9.jpg

Bent some ni-cop lines for the front and back

https://i.imgur.com/qqFGIGJ.jpg
https://i.imgur.com/7W2d7r4.jpg

I installed a Willwood pedal assembley with the brakes using two 13/16 master cylinders.
https://i.imgur.com/M5D5Ash.jpg

Hey Mark,

I did and thanks for your response I really appreciate the feedback. Man I hope you end up deciding to keep your nova I would love to see pictures of it completed.

Got the hubs painted and assembled. Mocked them on the car and everything fit great.
https://i.imgur.com/amyVN8l.jpg

https://i.imgur.com/R6Mmppb.jpg

https://i.imgur.com/6xsMbhe.jpg

Radiator support arrived and bolted up with no issues

https://i.imgur.com/sxZWHPM.jpg

Nice!!!!!!!!!!!!

Very nice progress.

Here are a couple pictures after I got it back on the ground.
I ordered some new wheels and tires and so I could move it to the new house.

https://i.imgur.com/WUNQRIc.jpg

https://i.imgur.com/Q3rl8mf.jpg

Always loved these early cars. Wheel/tire sizes/BSing?

Thanks,
Wheels Rocket Racing Attack
Front 18x10 with 275/35
Rear 18x11 with 315/30
Both with 5" bs

killer
 

Killer car,killer build. Love the early Novas yours looks great

Nice I have a 65' Nova Pro touring car I'm about to buy wheels for. Those look great.

I can tell you have more than a minitub, how wide are your wheel wells and what is the width of your rear end if you don't mind me asking?

Here is my 65' sedan.

https://i.imgur.com/XuRWzPn.jpeg

Love the early Nova's. That small body just did it for me.

Very nice and I hope to build one of these next.


Sent from my iPhone using Tapatalk

I can fit a 335 or 18x12 with custom offset wheels. Last time i measured the opening was around 15". The frame rails and tubs are not stock. The rear end is custom as well

Car looks sick, I wish my body was that straight. What brand of hood is that?

Its been a while since I bought it but I'm 90% certain its an AMD hood. It had to have a wee bit of tweaking to get the arch to match the fender lines exactly but nothing major.

https://www.autometaldirect.com/amd-...ova-p-541.html


Good idea on the aftermarket frame rails I had to redo mine after the rear started to sag and creased my quarters. It was an expensive problem.

I now have the new frame rails and the rear of the cage has down bars going all the way to the end of the frame rails. When we did the new frame rails we added about 3" to the minitub so I have about 15" of room as well now.

Looking forward to seeing how your car turns out!

Been a while but here are some progress pics. Been busy with getting remarried and getting a new shop. Went and got a used 2010 camaro from copart as a donor. LS3/TR6060

https://i.imgur.com/TyeTMnz.png

https://i.imgur.com/CoT7e7O.jpg

https://i.imgur.com/J0Wm2YS.jpg

https://i.imgur.com/ouB09pl.jpg

https://i.imgur.com/kV71N5Q.png

Here are some exterior shots and one at the current state of the interior.

Last week it started over on the first try so I am pretty excited.

https://i.imgur.com/ohlZPEY.jpg

https://i.imgur.com/Eob8IeG.jpg

https://i.imgur.com/1y8j16B.jpg

I like what you got going on. The Nova looks good.