18X12 Pictures needed
 

Please post some pictures with 18x12s... make/model doesn't matter

Just the wheels? Wheels and tires, or wheels on a car?

https://lateral-g.net/gulbranson/wheels/hre2.jpg

pictures on cars is first choice, then pictures of wheels and tires. Wheels by themselves works too.

Thank you,
-jason

http://www.fletcherscustoms.com/proj..._001.sized.jpg
http://www.fletcherscustoms.com/proj..._004.sized.jpg
http://www.fletcherscustoms.com/proj...46_2.sized.jpg
http://www.fletcherscustoms.com/proj...fing.sized.jpg
http://www.fletcherscustoms.com/proj...69/wheels6.jpg

18x12 6" backspace

http://www.z069.us/68/exterior/speedway.jpg

http://www.z069.us/68/exterior/dock_1b.jpg

http://www.z069.us/68/exterior/web_a5.jpg

HRE's

Here are 2 pics of the Firebird at arriving at SEMA with Budnik GTX 18 X 12s
and going into SEMA with the Forgeline ZX3Ps 18 X 12s

Scott, Your car is really coming together and looking seriously nice!

Amen That thing is a bad boy!:thumbsup:

We have 19x12.5's on Rosie but those are on the front,even bigger on the back ..........LOL:)

Killer stance!!!! :bow: Could you plese give some details of your suspension ?

LOVE THAT CAR!!
Got any hi-res photos of that beast?!?:hail: :hail:
VERY NICE!

Thank you so much for the pictures.

Grab a current Hot Rod magazine.

Does Budnik make the fat lip series anymore?specifically the Fontana? i dont see it on their websight?

DSE mini tub with there 3" drop leafs, DSE arms, with 2" drop springs with a 1/2 coil cut. I like em low!! Car drove really well, but was limited to about 80% of the normal full lock to lock.

Here is one. Old pic , Or grab a current issue of Hot Rod .
Just dont read it , might make you sick !

Kinesis
 

thats a seriously nice wheel! any more pics if em? :thumbsup:

:thumbsup: :thumbsup:

18x12 On A 71 Camaro
 

Here's A Pic

No pic. :_paranoid

Thanks for all of the submissions. Although I doubt anymore pics would be necessary since I am no longer w/budnik.

-Jason

Ya this thread is just funny, reading through.... so much has changed since it first started. 95% of the O.G. Budnik team is LONG gone....

Whats going on with Budnik anway?? Seems to be alot of problems getting wheels lately?? I paid for my wheels 12-20-07 and its now 03-18-08 and they're not even scheduled to ship until 04-03-08.........if that even happens!!! Not sure if the problem is the distributor I used or Budnik.:mad:

My guess is Budnik....... most likely the dealer orders directly from them.
They are always slow, that is a long time to wait for wheels.

18 x 12 with fat lip design

http://i9.photobucket.com/albums/a91...HEETMETAL4.jpg

http://i9.photobucket.com/albums/a91...WITHWHEELS.jpg

Here is a shot with a 19X12 but it gives you an idea of the dish that you will have.
http://i269.photobucket.com/albums/j...lt/Img0003.jpg

Here is a 22X12 close up so you can see the dish again.
http://i269.photobucket.com/albums/j...lt/Img0075.jpg

If you guys are having problems getting wheels we can get you three piece wheels in most of these sizes in three to four weeks or faster with no problems, I have the Fesler wheels and Asanti makes my wheels so I can use any of their centers on my wheels as well. We usually can get them in under three weeks just depends on whats going on.:thumbsup:

Our Rushforth Wheels are 3 weeks to build, 4 weeks delivered.

Schott wheels are also 4 weeks to build right now. Some companies get it right, and some don't. We buy outers from a few different companies and keep a good stock of them so production is not held up because "we ran out of outers" like other outfits.. cough cough.

:thumbsup: