Oval Exhaust??
 

I have a 67 Camaro with about 3-4 inches ground clearance to the frame. I would like to update my exhaust to a 3.5" oval system with a x-pipe, quieter mufflers and tailpipes.
I currently run a 540 BBC with 3" H-pipe to flowmaster mufflers and no tailpipes. Its way to loud!

Anyone have any experience with the oval tubing?
I would appreciate seeing some pics

Thank You

Mike, Dr. Gas has just what you need:

http://www.drgas.com/store/home.php?cat=8

Spintech

Mike

I sure like mine so far. :thumbsup:

Pro Fab in Charlotte NC has a bunch of stainless oval they use on stockcars.

I have Spintech as well.

http://i71.photobucket.com/albums/i1...icture_012.jpg

I called up Dave at Spintech and said "Listen, I need a 3" exhaust for a 68 Camaro. I want an X-Pipe, I have 3.5" collectors, I want oval tubing, and I have Air Ride, but I want full tailpipes. Oh, and I have no idea what parts I need to buy."

He responded by slowly rattling off every part number and quantity we would need and then putting together an order. I suggest you do the same. Be sure to say that Steve at Twist Machine referred you so that you get the same treatment. He was very patient and thorough. Note that this is for a full custom system. There is no such thing as an off the shelf oval system. Dr. Gas is a great bunch of people as well. And they are the originators of the X-pipe.

http://www.spintechmufflers.com/spin...ntechindex.asp

My experience with Dr Gas is also very positive. I spoke with them (Dave I think) and said I needed help with some custom bends so my x-pipe would fit well in my vert and they came through with flying colors. Phase II will be Steve's approach (thanks, Steve).

Dang that is tight and clean

Mike

whens your car gonna be done?