Which tools would you guys recommend?
 

OK, since I'm setting up here and trying to get all the tools I need, I thought I'd see what you guys would recommend. Here's what I've got:

About every socket needed
About every screwdriver needed
About every pliers and adjustable wrench needed
Lots of crowbars and prybars
Several drills (still need a cordless one)
DA sander
HVLP sprayer
Impart wrench
Air ratchet
Grinder, angle grinder, and cutoff tool
Sawzall
Chop saw
Rotisserie
Lots of jackstands and a good jack
Powdercoating setup with oven
MIG welder (coming soon)
Lots of drop lights and things

And probably some other stuff I can't think of. What tools do you guys think I should get my hands on?

You may be a ways off from needing this, but how about:
heat gun
wire splicer / crimper
butt connectors
solder
soldering gun
heat shrink
test light
wire loom

Got all of that already. :thumbsup:

blasting cabinet?

a plasmatorch i couldnt live without mine... a good stationary grinder... one with long abrasive bands... a TIG welder, tube bender, a lathe.... a lift an oxy acetylene torch... and the list just goes on...

How about a good press and a parts washer , I use both of mine.

amen to the press..... the partswasher just makes me jealoux

press for sure parts washer/presure washer, blast cabinet,

LIFT ;)

OBDII reader

well it depends what you plan on building. im building my tools also. youll never have enough tools. i know i wont.

heres some equiptment i have and love.

2 sheet metal brakes, one is box and pan.
Tig welder with out a doubt! body hammers.
plama cutter.
bead roller
shrinker/strecher
shot bags
horizontial/ vertical bandsaw. A must if you work with and box or round tubing.
Mandrel tubing bender(next on my list)
Vertical mill
stud gun for body work.
Lots of air tools!!!!
and many more.