![]() |
anyone have a drive shaft
im looking for a driveshaft that will work for my 69 camaro witha 700r4..either one that is for this application or one that i can cut to make work ect..let me know what you got this is the last thing i need to get the girl back on the road with the new tranny..
|
Where are you located. I have one I just pulled off my th400. You might be able to make it work.
|
im located in souther louisiana..i wonder what it would be to ship that thing..
|
I have a stock shaft from a 69 camaro with turbo 350. You would need to have it shortened. I am in Pensacola. Shouldnt be too much to ship. Scott
|
what do you want for it..or even a questimate on shipping
|
Save yourself the shipping dollars and pick up a used shaft at the junkyard. Any Astro Van, truck or S10 that had a 700R4 will have exactly what you need.
Are you still running the stock rear? You may be able to re-use the stock driveshaft by swapping on a new yoke with an "adapter" u-joint... Something to check into. Mark |
my stock drive shaft is toast broke on me doing 80 on the interstate this is why im doing the tranny swap. kinda tore up my old one..and yes i am useing the stock rear..so at a wrecking yard what would i be looking at for a donor
|
http://www.thrashdriveshaft.com/
their shafts are made to order and are top quality..it will probably not cost much more than having a shaft cut... |
| All times are GMT -7. The time now is 05:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net