Notch Tube Clamp Sets.
 

These are similar to the other tube clamps, but the design has been taken a bit further.

http://www.gmachineracing.com/sitebu...03-345x253.jpg


It has one side that welds into the tube then the other side is notched to fit the cagework. The Ultimate in Strangth and Stealth.

each set is $87 and comes with everything shown. Enough for one removable bar.
http://www.gmachineracing.com/images/weld_004.jpg

sizes include,
1.75" by .120 and .095 wall
1.5" by .120 and .095 wall.


thanks,
Jason