'66 Convertible gets pipes
 

Little update:
The chassis and sheet metal are finished so we loaded her up for a trip to Performance Exhaust. The car has so many chassis and suspension mods the exhaust needed to be scratch built. Dave Faver did a great job of tucking everything up tight and hitting all of the spaces dead center. The pipes also fit the frame cutouts like a glove. Now that it is all tacked together we will take it back to the shop and TIG weld it all with stainless rod.

http://memimage.cardomain.net/member...61_52_full.jpg

http://memimage.cardomain.net/member...61_54_full.jpg


http://memimage.cardomain.net/member...61_53_full.jpg

Brent
"Build em' light and wind em' tight!"
www.cardomain.com/ride/2660122
www.cardomain.com/ride/2659961

Looks fantastic. That thing has a really wide tunnel for exhaust.

Looks great!!

Beutiful job! its going to be one awsome ride!

WOW that looks great. Is that 2.5" pipe?


Here are a few pics of a 69 stang were going motor work too.(the underside of the car is bad)

http://s-seriesforum.com/albums/albu..._007.sized.jpg
http://s-seriesforum.com/albums/albu..._005.sized.jpg
http://s-seriesforum.com/albums/albu..._002.sized.jpg

All 3" started out as a box of U bends. Not the best but it works for this car.


Ur set up is super sweet.

thats how to do a stang! :hail:

Looks awesome, should sound great. That car will be sweet when it's done.

Thanks!
 

Thank you for the compliments.

Bad 94, Yes it is 2.5" pipe. It would have been a mess to try to fit 3" in it and my motor combination does not need the extra pipe.

Prodigy, The tunnel was cut a widened at where the front torque arm is mounted. Added almost 4" of width.

Brent
"Build em' light and wind em' tight!"
www.cardomain.com/ride/2660122
www.cardomain.com/ride/2659961