Opinions on a Carb
 

This is mainly going to be a street/show car, it may see the 1/4 mile twice a year or so. What carb. do you think would be compliment my setup? I am open to all opinions. Here is my setup;

502 Gen VI 4 bolt main, 9:1 CR
Melling hv oil pump
Crane solid roller p/n 168601 cam .615 .636 246 254 dur @ .050,
crane solid roller lifters
GMPP 12363400 Aluminum Rectangle port heads
GMPP 12361323 1.7 alum Rockers
Edelbrock victor jr 454-R intake
Crank Ext. ballanced, nitriated, crossed drilled gm p/n 10198922
Rods Forged 4340 Steel
Pistons GM P/N 12533507 Forged Aluminum
MSD Pro-Billet Dist.

950 HP if you do not need a choke

The car will have a tko600 and mainly be street driven, would mechanical secondaries still be the way to go?