Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Trucks (https://www.lateral-g.net/forums/forumdisplay.php?f=54)
-   -   LS3 1968 C10 install (https://www.lateral-g.net/forums/showthread.php?t=14413)

blakeaz33 04-05-2008 11:51 PM

LS3 1968 C10 install
 
I've got an LS3 that I'm planning on intalling in my 68 C10 - I've beem searching for headers online this evening and not coming up with much. Wanted to check if anyone has done this swap and used a specific part for the headers. There is a ton of space in these trucks so I would think something existing would work. thanks.

Tom.A 04-06-2008 10:09 AM

I would think there is many choices. I think JBA makes some for trucks, however you might be able to use 4th gen F-Body headers. I have an LS3 going into my Chevelle and Edelbrock makes these stainless 1-3/4" stepped to 1-7/8". They may also fit.
http://i186.photobucket.com/albums/x...erf/hd1000.jpg

blakeaz33 04-06-2008 11:54 AM

Quote:

Originally Posted by tom_a (Post 144159)
I would think there is many choices. I think JBA makes some for trucks, however you might be able to use 4th gen F-Body headers. I have an LS3 going into my Chevelle and Edelbrock makes these stainless 1-3/4" stepped to 1-7/8". They may also fit.
http://i186.photobucket.com/albums/x...erf/hd1000.jpg

Thanks Tom, I'll check them out - your Chevelle is looking great!


All times are GMT -5. The time now is 06:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net