Lateral-g Forums - CNC Master Cylinder Resavoir.

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - CNC Master Cylinder Resavoir. (https://www.lateral-g.net/forums/showthread.php?t=14429)

1 Dwn Cam

04-07-2008 02:19 PM

CNC Master Cylinder Resavoir.

Anybody have a picture of their CNC master cylinder resavoir #1484. I purchased one today and want to see how they look mounted on the firewall. Also do they have a threaded fitting for a AN-4 male feed line?

http://www.cncbrakes.com/acc.asp?grp...rrk&subseries=

1 Dwn Cam

04-09-2008 09:36 AM

All the bad ass cars on this forum and nobody has one? I find that hard to believe.

1 Dwn Cam

04-09-2008 04:59 PM

2 Attachment(s)

Just got it back from the polishers.

rjsjea

04-09-2008 05:17 PM

1 Attachment(s)

I have the master/clutch cylinders mounted under the dash and have been looking at those to use for a reservoir mounted on the firewall..............not there yet, but I think that will look nice. I also have been lookin at these ones.

1 Dwn Cam

04-09-2008 11:07 PM

WOW!:wow:Those are way sweet. Who makes those?

rjsjea

04-10-2008 01:56 PM

www.cvproducts.com part #cvc450. Since I havent bought them yet I would like to know what else is out there......anybody???

tjbruning

04-10-2008 03:05 PM

Quote:

Originally Posted by rjsjea (Post 144753)

www.cvproducts.com part #cvc450. Since I havent bought them yet I would like to know what else is out there......anybody???

rob, I have the printout off cv products website of that very same thing... you have good taste in expensive parts :cool:

tilton makes nice resevoirs also...

All times are GMT -7. The time now is 11:20 AM.