radiator for 69 camaro
 

hay ladies and gent's

has any one ever used a ron davis radiator?

i'm also interested if any one else would like to buy one. i can get three or more for 970.00 plus shipping.
the p/n is 11-16CA67. it has two fans hi out put and a nice over flow tank bind the rad. if interested send me an e-mail. [email protected] .
i would like to get the better price . it list for 1136.22 plus shipping.

tony69:
willy: :willy: :willy: :willy: :unibrow:

LOL! What incredible timing. We are launching a special on Ron Davis and PRC radiators this weekend! I have both Ron Davis and PRC in stock, both are killer units. The Ron Davis is well respected here. The PRC may new to many here, but is also a fantastic unit and looks almost exactly like the Ron Davis and has 3500 CFM 13" fans, over size shroud, Etc, just a little less money.

No minimum required

Frank I have a PRC rad, didn't know they offered the fans/shroud, and don't see it on their site. Do you have a pic you could share with a brother? ;)

I have a Mark VIII fan I was going to make work...but this PRC setup interests me!

Here is the PRC units we have. Double pass for LS1 with both fitting on pass side, Steam line adapter, 13" 3600CFM fans, Bla, Bla, Bla, only $800. I have 3 on the shelf.

http://i169.photobucket.com/albums/u...amaroLS1FS.jpg

http://i169.photobucket.com/albums/u...1-radiator.jpg

Thanks for the visual Frank! Looks a lot like mine, except mine is setup for a LT1. I'll have to get a price in the fans/shroud!

Let me know when your ready and I will see what we can do. Do you have somoen you trust to weld it or do you need to send it to them?

What needs to be welded? It looks like a screw on deal.