71 ford torino
 

i have a new prodject car, a 71 ford torino broham. i am having trouble finding any sites for info on this car. it has a 351 4v cleavland with a c 6 trans. any info on where to buy rubber kits and other restoration type parts as well as g-machine type parts would be greatly appreciated! after building a couple chevys im kinda spoiled, the ford camp is kinda new to me.

Rubber try http://166.82.96.3/homeframes.html the rest i have no clue on good luck.

http://www.torinocobra.com/main1.htm

http://www.ford-forums.com/ford-torino/

http://www.timelessrides.com/classic...torino-forums/

I have a few
 

For general question some info can be found here. Many guys over there know a fair amount about suspension on that year also. I wish I could help but I have a 69 and the set up is totaly different.

http://www.fordmuscle.com/forums/torino-pages/

Dearborn clasics also has some of the interior and rubber parts you need but they are often pricey.

Some advice on engine mods here

http://www.network54.com/Forum/119419/

I know an OAD will bolt up in place of the C6 pretty much with little to no mods. Lentech and a few other companies make good valebodies and fully built AODs to handle a bunch of HP. a freind of mine runs a Mustang with a 351 cleveland and an AOD in the low 11s consistantly, he runs a Lentech valve body.

Maybe Rupp can chime in here, he has the Fairlane and may be able to give you some feedback.