SEMA thrash 08
 

Well just as the title said we are working on our SEMA car.
Most from here will know us as a great source for parts and our wheel lines.
But believe it or not we are a full service shop.
This project always seems to be on the back burner, But this year its time to throw are hat into the big area and see how we stand up. So we have some great people on board working with us.
Ben Hermance did the rendering and it came out looking great.
Tracey Weaver from the Recovery Room is going to handle the interior for us. If you have every had the opportunity to see Traceys work you know this one will set the car apart. He does killer work. ( Thanks to Kenny and Travis of Kenny Davis Hot Rods for hooking us up with Tracey)
Global West sent us there new B-body upper and lower control arms with there new coilover system to keep the front end in place.( Thanks to Kevin Doyle) A custom rear coilover set up will keep the Moser 9 in line.
Alan and Shiela Budnik sent us a set of Budnik Trigs to match Ben's rendering.
So take look and follow along the build.
Tim & Jim

very cool project, look forward to seeing it there.

Jody

Nice !
I've been looking forward to this one.
Ben showed this a while back.
I just gave up on my 62 Bel Air in leiu of a Nova.... and you are gonna make me regret it !:lol:

Looks sweet Tim. I'll be following the process. I hope to be back in touch for some parts soon. I think my Dad is close to the end of the Honey Do list.

Later.

Looks killer, Tim! We'll have to swing by and see the progress!

Nice! Post lots of pics!! :yes:

Thanks guys. We will be posting pic's as we go. We are working on the rear suspension right now. It should work out great to keep the big B-body planted to the ground. Just ordered the rear coilovers yesterday from varishock.
Kevin, Drop by the shop any time you like. We would be happy to have you.
Tim

Cool, Tim. We're going to need regular updates. :cheers:

Subscribed - can't wait

Here's a little update on the 62. We have been working on the chassis to get this big boat planted to the ground. Well the rear had to be done from scratch. No one makes anything for the B -Body cars. So we just made it ourselves. With the help of our good friend Wade Sellers. We started with a Moser 9 rear housing made for the B- Body brackets, But found out this just wasn't going to work. We wanted the car to sit low with out bags. So the solution was a coil over set up. We notched the frame for the coil overs to clear .chopped the pan hard bracket did a little cutting on the global west bracket and pretty much did what ever it took to get this thing on the ground. The coil overs will ride up through the truck panel behind the rear seat. Now on to the front. Here's some picks as of today.
Ben Hermance and Tracey Weaver are working on the interior sketches.
There's a lot more to come in the next week.