335/30 18 on 67'-68'
 

Ok this subject is not new I know. I'm going DSE Quadralink & deep tubs on my 67'. DSE recomends 315s on 18x11s for 67'-68'. Thats what customer cars have on their site, etc. I need to order wheels & tires soon as the
DSE stuff is on the way. I know some have done 335s on 67'-68' but how
tight are they? If I go 315s can skip the lip rolling? Car is painted. 9 in. on
the way is DSE spec. 50" + 2.5 offset each side. So 55". Any BS & axle
measurments for the two combos would be great!

Peter

Peter, I just ordered 335 for my 67.I have the same as far as suspension,but i stretched the inner tubs and cut the lip about 1/4" I don't have my tires yet but they shouldn't be too far away. Hopefully someone else will chime in and give us a forsure answer.

Jeff,
Got any close up pictures of the 18x12's and the wheel lip area?

Chris

My rims were supposed to be here 2 weeks ago. I went with home made minitub on the rear of my car. I have had the tires for the past year. If my rims get here this week I will post up pictures. The tires fit really well when I was mocking it up. These are Michelin PS2 335/30/18's