Need Help with rear suspension
 

I was wondering if anyone has ever used Heidts rear 4-link bolt in piece for 67-69 camaros? Also any feedback about other manufacturers would be great. I want to mini-tub the rear, so I can run a 20X12 with a nice deep lip.

Thanks ahead of time.

We sell 3 different 4 link rear suspension systems and the Heidts is not one of them. If you want a suspension system with good geometry look at wither DSE Quadra Link, Chris Alston G bar or Art Morrison new 4 link. We have instaled a lot of each the DSE and Chris Alston, and will soon be installing a Art Morrison set up so we can provide feedback on that also. But I know in advance the AM will be fantastic like everything else they make.

All three of these systems work and are proven. None of these system l speak of are change for the sake of change parts like the other 4 link systems.

You can see 20 X 12, 19 X 12 and 18 X 12 mini tub cars with 335 and 345 tires on our website.

To me Heidts parts should be left on the street rods.If you want it to handle great listen to ProdigyCustoms.

Thanks guys for the info so far. Frank I was wondering about the DSE quadra link system. My buddy that is going to do paint and body for me suggested it also. He is doing another '69 camaro for a customer and that guy is using all DSE suspension parts, including the subframe. Here is the question I have....Do I have to buy a new gas tank to do the quadra link and deep mini tubs from DSE?

Thanks,
Jason

If you want to run tailpipes you will need to notch the corners of your fuel tank, or buy a custom tank notched so you can snake tailpies by.