Norris Motorpsorts - VMax CNC Ported Throttle Body Available - $139 Shipped
 

Hey All,

I have been working with Pete Incaudo and he has finished up the CNC version of his ported TB for the LS2, LS3 and LS7. When I did some dyno testing for Pete and Corvette Enthusiast magazine we saw about an 8-10 HP and 7-8 TQ gain on a stock 2008 Z06. The gains were very close to the same whether it had a stock program or after tuning. The nice part was that no ther tuning was required after the install. The A/F barely changed.

Each unit is CNC machined and then hand finished and tested. There will also be serial number on each unit for verification.

This intro pricing is $139 shipped plus the core fee as mentioned and normal pricing will be $149. A $200 core fee will be charged until the core is returned. Full core credit will be refunded as long as a usable core is recieved within 14 days after delivery to you.

Due to the potential issues with recieving cores I have come up with this core return policy. Usable cores recieved within 14-21 days will recieve 80% ($160) of the core fee back. Usable cores recieved within 22-30 days will recieve 60% ($120) of the core fee back. Usable cores recieved within 32-60 days will recieve 50% ($100) of the core fee back. After 60 dyas there will be no core refund.

Attached are a couple photos and please feel free if there are any questions. Initially there are about 10 units available at this intro pricing.

For those with a C5 style fly by wire harness and going to a 90mm TB, I also have the proper plug and play harness available. No cutting and splicing of the factory harness.

Thanks.

Mike Norris

Sounds really cheap upgrade. And the best part is it wont need tuning:cool: