Lateral-g Forums - LS1 brake mounts question

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Wheels and Tires (https://www.lateral-g.net/forums/forumdisplay.php?f=53)

- - LS1 brake mounts question (https://www.lateral-g.net/forums/showthread.php?t=16633)

vannatta20

09-20-2008 09:08 PM

LS1 brake mounts question

http://www.pozziracing.com/12_corvet...es_on_fgen.htm

At the bottom of the page is the template for the front brakes. I was wondering what the thickness of the bracket should be? Anyone know? Thanks!

fabricatordave

09-21-2008 09:26 AM

it is .25 inch thick. that template is for 13 inch rotors. you need to move caliper holes in about half inch to use with camaro ls1 rotors

vannatta20

09-21-2008 09:23 PM

I thought the template on the right is for the 12 inch rotors? Is that correct?

vannatta20

09-23-2008 03:04 AM

I had a buddy of mine CNC a set for me. I am holding out drilling the holes until I can get to the car and test fit them.

Joey316G

09-27-2008 01:58 PM

are those brackets for C5 calipers and rotors?

fabricatordave

09-30-2008 11:33 PM

Quote:

Originally Posted by vannatta20 (Post 167081)

I thought the template on the right is for the 12 inch rotors? Is that correct?

13 inch

Rhino

10-03-2008 05:00 PM

Quote:

Originally Posted by fabricatordave (Post 168909)

13 inch

Can you please explain why you think this? If you know something not listed on the page, fill us in. This is the text found directly next to the pictures...

Quote:

Left is Rich Downing's template. I have been told the 12" and 13" brackets are the same with different "baskets" being the only difference, but it's unconfirmed because I have none of these parts. -David

Right is Brian's finished 12" bracket, the 6" marks are just for size, do not indicate the hole spacing. Increase or decrease rint out scale till the 6" actually measures 6" on your printout.

Hammered

10-07-2008 06:20 PM

13" I tried using that info for my own LS1 brake conversion and had to move the holes. In the end, I took my own measurements and designed my own bracket.

fabricatordave

10-26-2008 07:43 AM

Quote:

Originally Posted by Hammered (Post 170161)

13" I tried using that info for my own LS1 brake conversion and had to move the holes. In the end, I took my own measurements and designed my own bracket.

same here. stock caliper baskets are same, i made bracket from that template and did not work with 12 inch rotors. caliper was out to far 1/2 inch

All times are GMT -7. The time now is 04:29 AM.