![]() |
Filler over Bare Metal or 2K Primer?
I have a set of doors that were stripped to bare metal then primed with an etching primer then a 2k urethane primer. Can body filler be applied over the 2K or should I strip those areas back to bare metal?
|
baremetal is preferred, but be careful going over etch primer also.
|
| All times are GMT -7. The time now is 12:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net