New Guy, needing some help.
 

Jason, Jason Rushforth that is, sent me this way because I am in some need of assistance. While I do not have a G-Machine I think somebody may be able to help me out. I am currently building a show truck, it is a 2002 Chevrolet S-10 Blazer. Two door, bodydropped, laying rocker panel on a set of 20 inch Rushforth wheels. (purchasing after the first of the year). What I would like to do is outfit it with a set of C6 Z06 calipers and rotors. Is there a vendor on the site, or maybe a brake specialist that might be able to help me out. I know I would need a new bracket for the caliper to mount to the spindle, but what else? This may be a long shot, but it's worth a try. If all else fails I am a G-Machine fan, wish I would've built one instead of my truck, so i can enjoy the forum for sure!:thumbsup:

call tobin at Kore3.com. he'll either have what you need or be able to point you in the right direction. i got all my c6z parts from him.

Tim

yep the one stop that you need, Tobins a great guy to deal with.:thumbsup: thats who i got all my c6 zo6 brake parts from.

Thanks!
 

I was browsing their site earlier this afternoon. I emailed them, hopefully they will get back to me rather soon:yes:

Another vote for Tobin! He will take care of you!!

I'll find somebody to take care of me, and take my money!:yes:

I need a little help. I have no problem finding the part numbers for all the Z06 parts, but i am wondering about the C6 z51 parts. I am going to weigh my options, either one will do the trick. The Z06 setup would look better I am sure, bigger rotor behind Jasons wheels = sex! But, the calipers are going to cost me 210 a piece, rotors, just under 100. I bet the z51 calipers are around 100, so after factoring in the cost of pads, I bet I would save nearly 500 dollars with the kit. If anybody knows the part number for the c6 z51 brake calipers, please do share. I am having difficulties finding them on the gmpartsdirect website.:_paranoid