Forgeline Wheels 19X11 and 18X8 with Michelin PS2's
 

decided to sell My Forgeline SO3P wheels and Michelin Pilot Sport PS2 tires from Malitude. Since I've raised the front of the car for pan clearance my Vintage wheels fit, and that was the look I built the car for.

These wheel and tires have maybe 1000 miles on them and are in excellent condition, no curb rash or scratches. The rear wheels are 19X11" with 5.75" bs and 305/30-19 PS2's. The fronts are 18X8" with 5.5" bs and 235/40-18 PS2's. I also had a set of billet .250" spacers made for the front which I'm including, but the wheels/tires fit without them on a 64 Chevelle. Should also clear most muscle cars up front. The rears would need a minitub on an early Chevelle or first gen Camaro, but may fit later cars without issue, depending on the car.

The wheels were originally black with a diamond cut option and polished lips. They retail for about $5K for the set. I removed the centers and had them powdercoated silver, looks much better in my opinion on my car. The tires were nearly $1800 for the set.

Selling the package for $3500 shipped in the lower 48.

http://www.camcojb.com/temp/100_0159.jpg

http://www.camcojb.com/temp/100_0187.jpg

http://www.camcojb.com/temp/100_0185.jpg

http://www.camcojb.com/temp/100_0433r.jpg

http://www.camcojb.com/temp/100_0435r.jpg


Jody

That's a steal.:yes:

you know, it's probably too cheap. But it's still a fair amount for wheels and tires, plus you've got to find someone who can use your size and offset which narrows the market. I've got about $6K in them and I got a smoking deal on the wheels from Frank.

3 Piece so you could alter them and still be way ahead.

yep, forgot about that. Maybe I should change my price real quick......... :D

You better hurry:D ...correct me if I'm wrong. Be perfect for a first gen mini tub application. Rear tire is 26.3 and the front would probably work with your spacer or by sending them back to Forgeline to change the backspacing and width if you wanted. If I remember right it was around $500 to change my rear wheels when Frank sent them to Forgeline to narrow them and inch so they would fit in my tubs. Thread jack over.:_paranoid

Great deal for someone! With the spacers they should work on a first gen no problem....but for that price you could send them back!

The rears aren't a problem at all for a tubbed car with custom width axle...which we all end up doing! :lol:

Those should fit on a 2nd gen Camaro with little issue. Maybe a little tight in the back, but it'll fit with a fender lip roll. If I had the money, I'd jump on this deal. Good luck with the sale, Jody.

thanks Allen.

Jody

I know its been said but this is REALLY a great deal!