Lateral-g Forums - 64 Chevelle rear suspension

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - 64 Chevelle rear suspension (https://www.lateral-g.net/forums/showthread.php?t=18798)

bowtie_nut

01-30-2009 08:40 PM

64 Chevelle rear suspension

Does anyone know how the factory suspension will perform if the lower control arms are moved in 3" per side to accommodate larger tires?

camcojb

01-30-2009 08:44 PM

mine was minitubbed 3" per side, handles very well.
http://www.camcojb.com/temp/malitude%20245.jpg

Jody

ProdigyCustoms

01-30-2009 08:46 PM

We did Bills GTO, works well. We used a set of Hotchkis arms and a QA1 Crossmember kit

bowtie_nut

01-30-2009 08:51 PM

I was a little concerned when Moser said that they would narrow the axles and tubes, but they would not weld on the brackets. Glad to here that it as already been done with success. Jody where did you get your rear sway bar at?

camcojb

01-30-2009 08:52 PM

Quote:

Originally Posted by bowtie_nut (Post 192486)

custom made, Mark Stielow had it done.

Jody

All times are GMT -7. The time now is 06:42 PM.