Any body own a mid rise lift?
 

I was looking at the bend pak units as well as one at Greg Smith equipment the Atlas Pro 6MR . Any ideas or opinions?

Darren

we have an Aamcco- goes to 48 inches - cant work under car but good for brks etc

check this out...
 

http://www.maxjaxusa.com/index.html

Saw this on the gararge journal forum. It's designed to work in a garage with standard height ceilings. It is new, so I haven't been able to find anyone that actually owns one. Personally, I'm waiting to see if it performs as advertised, but I think it is priced below $2000.

-Matt

i have a mid rise in my shop, but im doing a 4 inch recess in the floor to flush it with the floor.. then its just a matter of setting 4 tall stands or "blocks" under either the frame corners or wheels to do some of the work where itit has turned out to be a bit of a pain to work with....

I picked up my 56" lift from www.harborfreight.com

Its made by central hydraulics and its advertised for 1400.

ITEM 91315-2VGA

http://inlinethumb31.webshots.com/11...600x600Q85.jpg

here is a (very messy) pic of the lift (with crap on it) and teh hole wheer its destined to go...

http://i155.photobucket.com/albums/s...ce_454/036.jpg
http://i155.photobucket.com/albums/s...ce_454/038.jpg
http://i155.photobucket.com/albums/s...ce_454/035.jpg