Lateral-g Forums - spinning assembly done.

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)

- - spinning assembly done. (https://www.lateral-g.net/forums/showthread.php?t=1942)

threestar40

09-25-2005 04:37 PM

spinning assembly done.

Got the bottom end put together today...everything went perfectly.

Lunati Promod 6.125" rods.
JE pistons with floating pins retained by wire locks.
Eagle 4340 non-twist crank (very nice piece by the way).

Speed Pro rings .018 on the top ring .012 on the bottom.

I probably should have gone about .002 more on each ring, but I didn't.

I'm betting the motor it will be Ok. :_paranoid

Here was the scene in my life today:http://threestar40.home.mindspring.c...mbly%20001.jpg

http://threestar40.home.mindspring.c...mbly%20004.jpg

Tomorrow, more progress.

Rick :lateral:

slow4dr

09-26-2005 12:28 PM

Quote:

Originally Posted by threestar40

Got the bottom end put together today...everything went perfectly.

Lunati Promod 6.125" rods.
JE pistons with floating pins retained by wire locks.
Eagle 4340 non-twist crank (very nice piece by the way).

Speed Pro rings .018 on the top ring .012 on the bottom.

I probably should have gone about .002 more on each ring, but I didn't.

I'm betting the motor it will be Ok.

Here was the scene in my life today
Tomorrow, more progress.

Rick :lateral:

:thumbsup: Thanks for the update Rick!

:yes:

XcYZ	09-26-2005 04:05 PM

Progress. :thumbsup:

lil427z

09-26-2005 07:14 PM

rick .keep up the good work . :thumbsup:
rick kirkindall

hotwheels

10-23-2005 09:30 AM

that look's awesome.........

All times are GMT -7. The time now is 12:12 PM.