Lateral-g Forums - Were can I find a tool to make

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Shop & Equipment (https://www.lateral-g.net/forums/forumdisplay.php?f=56)

- - Were can I find a tool to make (https://www.lateral-g.net/forums/showthread.php?t=19598)

Mikael A

03-10-2009 01:11 PM

Were can I find a tool to make

Were can I find a tool to make these holes.

Swain

03-10-2009 01:24 PM

Google Dimple Die Tool

deuce_454

03-10-2009 01:44 PM

i have seen one made on a lathe... two turned pieces with a hole thru both for a long bolt, in one end of the two there was a male and female "punch" to cut/stamp the hole.. (and a valve spring in the female to pust out the stamped out piece) turn them both 180 deg and re-insert the bolt and they would fit together to form the edges of the hole.... could be worked with either a wrench or pneumatic/electric impact wherch....

google time found this:

http://www.mittlerbros.com/punch__flares.htm

tjbruning

03-10-2009 01:54 PM

www.trick-tools.com

Mikael A

03-10-2009 02:27 PM

Thanks,I have a press and a lathe so I will make my own.

bentfab

03-10-2009 09:22 PM

Mitler Brothers

All times are GMT -7. The time now is 05:40 AM.