C6 Brake Bracket Mounting Nub Measurements Needed
 

Looking for measurements of the follow dimensions as dipicted in the picture below. Each is centerline to centerline. Whether hub-to-bolt or bolt-to-bolt.

Thanks in advance for any help you guys can give.

Thanks,
Todd


http://img3.imageshack.us/img3/9288/...htmeasurem.jpg

Is that a C5 spindle?

Indeed, it is. :thumbsup:

It was the best picture I could find to show the dimensions I needed, even though the ones I am looking for are off the C6 uprights. However, I do not think there is a difference for these measurements between C5/6.

Well if it is a corvette spindle I don't think you need a bracket? But I am not very sure hopefully somebody who knows for sure will awnser.

I'll be having some custom uprights CNC'd and need to finalize dimensions, I am going to stick to GM hubs & GM brake mounting specs for ease of packaging.

I borrowed that picture from eBay.

OH sweet sorry for wasting your time good luck PM steve rupp I think he just took a set off his car maybe he can get some measurments.

No worries. I sent Steve a PM, hopefully he can get some rough measurements.

Here's the specs from GM's drawings:

Line C: 128.000mm
Line A & B: 107.201mm

Thanks a bunch, Matt. Greatly appreciated. :hail:

Here's a quick rendering of the uprights if anyone is interested. This is the Passenger side.

http://img10.imageshack.us/img10/3352/knucklenew.jpg