Lateral-g Forums - Cold Air Intake

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)

- - Cold Air Intake (https://www.lateral-g.net/forums/showthread.php?t=19789)

Project Cortez

03-21-2009 11:16 AM

Cold Air Intake

I've got a 69 Camaro that is going to have a LS1 engine in it. What is everyone using for the air intake tubes? Please let me know or post any pictures of it. Thanks

Rybar

03-21-2009 01:06 PM

My new version built by Killer Customs: 3.5" Polished Alum Pipe

http://i34.photobucket.com/albums/d1...arichello3.jpg

My older version: 3.5" Steel ceramic coated.

http://i34.photobucket.com/albums/d1...ofDSC01428.jpg

awr68

03-21-2009 01:45 PM

Looks great Ryan!

I think you will find that everyone is fabbing up custom tubes.

Project Cortez

03-21-2009 03:37 PM

Ryan, since you replaced yours any chance you have your old one and want to sell it ???? Thanks for the responses

Rybar

03-21-2009 04:31 PM

Quote:

Originally Posted by Project Cortez (Post 202942)

Ryan, since you replaced yours any chance you have your old one and want to sell it ???? Thanks for the responses

I donated it to Tony Rapin's '68 project a while back. Sorry

68redcamaro

04-26-2009 08:43 PM

Cold air

1 Attachment(s)

I used one from Airaid.

AJSZR2326

04-27-2009 12:39 PM

http://www.pro-spoilers.com/ccases.html

or spectre.com
they make some nice stuff

XcYZ	04-27-2009 02:36 PM

I used 4" mandrel bent tubing, cut it, welded it, smoothed it, painted it. :thumbsup:

bigtyme1

04-27-2009 05:49 PM

Quote:

Originally Posted by AJSZR2326 (Post 209264)

if you pm me i can tell you where to get them premade or custom

Can you get them made with out having the car?

1FastHaole

04-27-2009 08:05 PM

Check out mine:

Not an LS but Holley Stealth Ram, intake is roughly same location. $48 plus shipping on eBay (including the filter):
http://www.sccacamaro.com/wp-content...78-450x301.jpg
Not quite as slick as some, but cheap and easy and works pretty well.
Good luck with your project!
Paul

All times are GMT -7. The time now is 02:52 AM.