Inventory overload! Clearing out early production blemished items in CF!
 

We just got 4 huge crates of new carbon parts in yesterday and I can't put most of it away in our shelves. We recently moved from our old building to a new bigger location in El Segundo and in the process, we cleared out a large storage area that was housing some early production blemished parts.

Here is what we have:

CF cowl hoods-

1. Used CF hood for test fitting on my 1968 Camaro to insure good panel gaps. Had bolt marks on underside where latch and hinges were attached. Weave and clear coat are in great condition. 20% off $699.00 retail. -Sold
2. CF hood with some clear coat cracks and weave distortion. 15% off of $699.00 retail

Rear decklids-

3. Weave distortion, tiny pin holes in clear coat, good fitment of panel itself- paint grade- 45% off of $499.00 retail- SOLD
4. Pits in clear coat, good weave, great fitment of panel. 20% off $499.00 retail- Sold

1969 Camaro rear spoilers-

5. weave distortion, pits in clear coat- 20% off $395.00 retail- SOLD!
6. weave distortion, pits in clear coat- 20% off $395.00 retail
7. weave distortion, pits in clear coat- 20% off $395.00 retail

1969 Header panels-

8-17- There are all types of imperfections on these ranging scratches, to weave distortions to pits in the cleat coat. We have 10 of these and they range from 10% off to 45% off depending on quality from the $225.00 retail price.

1967-68 Header panels-

18-25-Same as above, but we only have 7 of these types, and they range from 10% off to 45% off depending on quality from the $225.00 retail price. 2 of 7 SOLD

Cowl panels-

26-29- All these have a slight weave imperfection and clear coat pitting. 20% off of the $249.00 retail pricing. all 4 SOLD

Here is an example of the clear coat, scratches, and weave imprefections found in these parts. This is a small sample, but they typically all will be similar to these examples. These are tiny imperfections to most people, but they are not up to par of the quality we are known to offer.

Clearcoat pits:
http://i40.tinypic.com/2hsag5h.jpg

Clearcoat scratch:
http://i41.tinypic.com/se9i81.jpg

Weave distortion:
http://i40.tinypic.com/51cyz8.jpg


We will not be taking pics of each part as the process is too time consuming. These panels are offered on a first come, first serve basis and there are no returns for any of these blemished items for any reason.
To claim a certain panel, email or call with the item number (1-29) to tyler@anvilauto or 1-888-723-8882.

Good luck!

Tyler

Post above revised to show current available parts left.

Tyler

Question Tyler,
Did Anvil at one point make a L88 scooped 67-69 camaro hood? I think I saw some pics at one time. If so do you have any of those blem is fine.

Tonny

I was hoping for a blemished front spoiler for a 67. You know it is only a matter of time before it gets mangled. I keep putting off ordering one hoping to find a deal.

I'll take the rear decklid below if it's still available.

I tried to send a PM but your box is full.

3. Weave distortion, tiny pin holes in clear coat, good fitment of panel itself- paint grade- 45% off of $499.00 retail

Mike

Great deals.. especially if you're going to paint or re-clear the parts anyways.

Call me so we can get it in motion. PM box cleared out as well.



Call me at 1-888-723-8882 and I'll look for one for ya.

Tyler

I will call you tomorrow.

Post updated again.


Tyler