Lateral-g Forums - Toe conversion from degrees to inches

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - Toe conversion from degrees to inches (https://www.lateral-g.net/forums/showthread.php?t=20882)

gearheads78

05-25-2009 05:28 PM

Toe conversion from degrees to inches

I aligned my car today and the camber and caster dead on to the specs that came from my SC&C instructions. The toe said to set -1/16" but our alignment rack does not measure inches . I guessed and set -.30 degrees each side but I was wondering if there is a conversion.

Roadbuster

05-25-2009 07:33 PM

I had mine done for a 1/16 inch total or 1/32 inch per side and it was 0.07 degrees on the left and 0.06 degrees on the right.

Jon

Musclerodz

05-26-2009 12:14 AM

Quote:

Originally Posted by gearheads78 (Post 214554)

1/16" is .0625

David Pozzi

05-26-2009 01:27 AM

Here's a handy toe chart. Numbers are for ONE wheel.
http://www.smartracingproducts.com/p...e_settings.pdf

Roadbuster

05-26-2009 02:54 AM

Quote:

Originally Posted by David Pozzi (Post 214677)

Here's a handy toe chart. Numbers are for ONE wheel.
http://www.smartracingproducts.com/p...e_settings.pdf

Thank you David, I will be saving that!

Jon

gearheads78

05-26-2009 12:12 PM

Quote:

Originally Posted by Musclerodz (Post 214668)

1/16" is .0625

Not talking a measurement. I am talking degrees of rotation.

Quote:

Originally Posted by David Pozzi (Post 214677)

Here's a handy toe chart. Numbers are for ONE wheel.
http://www.smartracingproducts.com/p...e_settings.pdf

Thanks ...exactly what I was looking for:bow:

All times are GMT -5. The time now is 06:07 AM.