Lateral-g Forums - Spherical Bearings for stock arms

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Spherical Bearings for stock arms (https://www.lateral-g.net/forums/showthread.php?t=218)

JohnUlaszek

12-31-2004 07:22 AM

Spherical Bearings for stock arms

I should have an arm assembled with cross shaft within the next week or so.

http://www.x1nova.com/images/spherical2.jpg

CrossRamRich

03-21-2010 12:33 AM

Need to see

I am building a Trans Am race car and need to see how this is done.

JohnUlaszek

03-21-2010 06:33 AM

This thread came back from the dead :)

Had a design and prototype of an insert that could be welded into a stock arm, but it didn't take long to decide it just wasn't worth effort as I am not competing in any race class. There is a DSE subframe under the car now....

I have bunch of very expensive spherical bearings I could sell you cheap :)

All times are GMT -7. The time now is 06:57 AM.