Lateral-g Forums - C5 spindle/hub question

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - C5 spindle/hub question (https://www.lateral-g.net/forums/showthread.php?t=21898)

RobG	07-30-2009 09:07 AM

C5 spindle/hub question

What size are the bolts that hold the hub/bearing pack to the spindle?

Thanks :)

ElkyZO6

07-30-2009 12:44 PM

Quote:

Originally Posted by RobG (Post 226103)

What size are the bolts that hold the hub/bearing pack to the spindle?

Thanks :)

M12x1.75x54

RobG	07-30-2009 12:48 PM

Thanks!!

I'm assuming that I need allen heads for that?

ElkyZO6

07-30-2009 12:55 PM

I'm not sure. The gm parts picture for the corvette shows a hex head, but the ATX spindles use a allen head. I'm not 100% on this info though.

RobG	07-30-2009 01:42 PM

Thanks man I appreciate it. I'd like to use an ARP bolt in there if I can, time to dust off the calipers.

ElkyZO6

07-30-2009 03:05 PM

No problem. A reduced head ARP bolt would be nice in there, but I didn't see any 12mm bolts listed in their catalog.

All times are GMT -7. The time now is 02:55 PM.