Lateral-g Forums - CNC porting

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Engine (https://www.lateral-g.net/forums/forumdisplay.php?f=37)

- - CNC porting (https://www.lateral-g.net/forums/showthread.php?t=21968)

brucel

08-04-2009 06:15 AM

CNC porting

Any recomendations for CNC porting of LS1 heads? I have a 2002 LS1 that I would like to have the heads done on. Motor will be street driven and normally aspirated.

ZMAN1969

08-04-2009 10:45 AM

Cnc

Check with Texas speed, Livernois, Patriot they all do CNC heads. Tx speed has some nice 5.3 CNC heads that are great street heads IMO so do a search on LS1tech seems like lots of action on that board for all the LSX help you are looking for. good luck

XLexusTech

08-04-2009 12:42 PM

Quote:

Originally Posted by brucel (Post 227012)

Any recomendations for CNC porting of LS1 heads? I have a 2002 LS1 that I would like to have the heads done on. Motor will be street driven and normally aspirated.

check these guys out..... http://www.golenengineservice.com/

All times are GMT -7. The time now is 09:12 AM.