Pictures from buttonwillow
 

Professional shots by the guy out there...

I need adjustable upper control arms to dial out the positive camber. Gmod isn't enough....

http://img19.imageshack.us/img19/5737/vp8022.jpg

http://img43.imageshack.us/img43/6948/vp8289.jpg

http://img256.imageshack.us/img256/4347/vp8576.jpg

http://img294.imageshack.us/img294/5522/vp0746.jpg

http://img259.imageshack.us/img259/1097/vp0906.jpg

Getting sloppy/over confident at the end of the day.. Came in way too hot. Fun sequence though

http://img43.imageshack.us/img43/3720/vp1078.jpg

http://img259.imageshack.us/img259/1190/vp1081.jpg

http://img190.imageshack.us/img190/4737/vp1084.jpg

http://img441.imageshack.us/img441/2109/vp1087.jpg

http://img27.imageshack.us/img27/9072/vp1092.jpg

Looks fun, I can just see the HEAT in the air. It must have been so HOTT out there.

Great pics. Looks like a great time. Wish I was there. :thumbsup:

Nice recovery on the corner entry. I'm always glad to see one of these cars getting used the way it was built for.:thumbsup:

You should see him run down a Ferarri on youtube!!! lol:thumbsup:
Great pics rogue. Looks like you had fun.:cheers:

Very nice man, glad to see some of these cars getting some HARD use!

Thanks for posting, car looks great! Some really good pics.

Bet it got even hotter with the little off track section.... really gets the heart rate up there!

always fun to hit the track and BW is a good track.

word of advice, if you start off the track like those photos show, straighten the steering wheel/car out and drive OFF the track, do NOT try to stay in it like those photos show you doing. You got lucky but sooner or later you will hook an edge and either shoot back across the track and take someone out, or roll the car. Willow Springs for instance is notorious for rolling cars because people try to save it, and BW run off is not much better.

Also I would consider some sort of skid plate for your oil pan and maybe try to tuck the headers up a bit better... as you just showed the occasional off track excursion does happen and you could very well rip that pan right off so I would make a skid plate out of thick aluminum, or 1/4" steel. If you can't protect the exhaust then you might rip it off, but that doesn't blow the engine ;) so not as detrimental. You can always drive home on open headers :unibrow:

DAMN! I need to get back on the track!

BW's fun!!!

John

Awesome photos.... :thumbsup: