Harness slots needed to add to a factory seat.
 

Hi guys.

I currently have a set of Corbeau LG-1 seats in my 2002 Lightning and have finally had it with their hardness, sloppy sliders, busted thigh bolster foam, and overall crappy-ness.

I have decided to go the somewhat popular route of cutting down the passnger side bench/bucket and modify it to be a regular bucket like the driver side seat.

What I would like is a shoulder harness belt passthrough, as that was the primary reason I bought the Corbeaus.

here is a picture of a factory seat:

http://img.photobucket.com/albums/v6...expymod019.jpg

My plan is to cut open at the seam in the black leather right above the SVT logo, but I feel just a cut slot may be a bit ugly and also be prone to tearing out from the stress and rubbing of the harness while I am participating in HPDEs.

I would LOVE to find a set of billet harness slots, about 7 inches wide, and any help would be greatly appreciated.

Thanks in advance,

Ian Schwartz