Keisler hydraulic actuator kit and LS style clutch??
 

So I have the Keisler hydraulic actuator kit ( http://www.keislerauto.com/index.php...8-74-nova.html ) and have a question about using a LS style clutch with it. I've been talking to a guy about getting a Monster level 3 clutch but he wasn't certain if the Keisler release bearing and Wilwood master would work with a LS style clutch. I'm assuming it will as other guys here are using it.

He was wondering if the Keisler release bearing and master would work with a 98-up Camaro/TA or GTO clutch. Here's one of the messages he sent me also:
You know what, the more I study that pic, I do NOT think it is a LS style slave/TOB. Looking at 2 things...
The line that is provided in that kit, the fitting on both ends are different from a typcial LS style MC/Slave line. So, ask them what STYLE clutch works with that setup would be the best bet. I would THINK though, that by using a kit to adapt the TKO to a LS1 motor (that IS what you are doing correct?) that they would keep things as simple as possible, and use a LS1 clutch. So, let me know what you find out though...

If anyone can help me out that would be great. Thanks in advance.