Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)
-   -   how long do you guys let your primer cure out (https://www.lateral-g.net/forums/showthread.php?t=22830)

speedshftr 09-25-2009 05:19 PM

how long do you guys let your primer cure out
 
wondering how long to wait for all the solvents to escape/?thank you

68protouring454 09-25-2009 06:00 PM

best is 1 week or more, and if its sunny out get it out in the sun.

elitecustombody 09-25-2009 08:17 PM

if it's a high dollar job,I like to let it sit for a good month

waynieZ 09-25-2009 08:33 PM

Thats what my painter wants me to wait atleast a month.

elitecustombody 09-25-2009 09:39 PM

the longer you wait,the less chances of any shrinking of bodywork or other materials show up in the paint surface.Try to push the car and let it sit and cook in sunlight during the day for as long as possible and if possible,repeat everyday.Some shops are usually dark and cool and without some heat all materials applied on the shell may not fully cure or will never have a chance to shrink and settle.With that said,you don't want streaks/ spots of filler or not fully cured primer ruin a nice paint job

68protouring454 09-26-2009 06:35 AM

while i agree to a point with longer is better, if you bring the panel to the temp specified by the primer manufacturer for the time said, it should be fully cured, period. while we know this is not true in alot of cases, this is where higher end materials, which use better ingredients shine above all.
we have to be serious, there are not many car owners who want to see the car at a standstill for 30 days for primer, when more then likely it will be primed 2-3 times.

J2SpeedandCustom 09-26-2009 07:02 AM

Depends on how nice you want the final product to be? Anytime you mix material with solvents and spray it on a panel it's going to take UV and time to soak out/cure. If you have a paint shop with a bake system the end result can be achieved in a shorter time period. But it still takes time to make it "right". And a customer that wants it right will understand the timeline when the process is explained to him/her.

Bakaruda 09-26-2009 11:18 AM

I work part time at a body shop. We do alot of frame up resto's. All I can say is we let it set for about a week before we start working the panel. We let cars set about 2 weeks before we color sand and buff a car. I have never seen a problem with any of them as of yet. My truck was painted this way over 3 years ago and have had no issues with it. Just my two cents 30 days is way to long.


All times are GMT -7. The time now is 07:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net