Anyone using Baer's Extreme Plus brakes?
 

I'm just wondering performance wise if someone has driving impressions, fitment recomendations, etc. The set I am looking at has 14inch rotors and are setup to run on the ATS spindles. I have 19 inch wheels on the front of the car currently, and the car still has stock master and booster (drums in rear). Lastly, if you installed a set, did or do they have an effect on wheel spacing? Many thanks for any info---my buddy removed a set from a customers car and they only have 100 miles on them. Seems like a steal for 1500.00 to me, however I have learned that asking questions of others is smart before any purchase like this, and I don't have a bunch of experience with these brakes yet. Any info is much appreciated!

Doug

I have a set but haven't tried them yet so I'm of no help that way, but, they are a very wide caliper and will not fit a lot of wheels unless they are custom made. I had a set of custom forgelines made to clear. If you get the template from there web site (I think it would be NO40P?) you can use it to see if you have the clearance. At 1500 I would say thats a pretty good deal.