BMR Tourqe Link install!
 

So I spent the last two days putting in my BMR Torqe Link rear suspension. The kit looks real good Im totaly happy with it. The kit was all there and the instructions were great. It took about 12 hours total with the help of a friend.
The ajustment on this system looks great as well. I cant wait to drive this car and try it out.

Looks good! What subframe are you running?

I see you're a fan of the color orange :) It looks great under there. Let us know how it is once you get out there and drive it.

Thanks
I'm running the stock sub frame with DSE and Speedtech coil over's and
a-arms. Also a Unisteer rack. It's comming together. The engine and trans are going in next.

Good use of the Army poncho! :lol:

It looks great! When do you plan on having it on the road?

thanks
My goal is to have it running by spring. I don't think I will have the interior done by then but everything else should be ready. I will work on interior and tuning over the summer. I hope to have it completed in a year from now.

I'm really curious, how low does the torque arm hang---for instance--is it lower than the stock frame rails? I really like the way it looks from the back--like a lat dynamics 3 link---very cool.

Will also be interested how the exhaust works its way through there--

Doug

It seems to be sitting up a little higher than the front subframe rails but does drop lower as it goes back to the rear diff. Maybe this picture will give you a better look. here's a link with a little more info on the car.

https://lateral-g.net/forums/showthread.php4?t=23684

Thanks for posting up the pics---and the info!! Looking forward to seeing it come together!

Doug

Are the lower bars adjustable---it looks like they have an adjusting nut on them---