Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)
-   -   Custom badges and emblems (https://www.lateral-g.net/forums/showthread.php?t=2416)

TwinSting 11-13-2005 05:52 PM

Custom badges and emblems
 
Does anyone here know of anyone who makes really nice custom badges and emblems other then Motor Head Jewlery?

Wild_Ron 11-13-2005 06:04 PM

get hold bill howell on here.he had some made for billy goat

JayR 11-13-2005 06:07 PM

Check out www.motorheadjewelry.com They make great stuff and have a great reputation.

Diognes56 03-14-2006 03:33 PM

Hehe I don't have to feel bad about kind of hijacking this thread because it is pretty old :D .

Anyway, are there any other places? Where did Bill Howell get his done? My brother is looking at possibly getting some custom badges made for his '99 Camaro, once the engine upgrade and other stuff are done. I am going to point him towards Motorhead Jewelry, but would like to give him a few options. Thanks guys :D .

On a side note, here is a rendering of what his car is going to look like :cool: .

http://www.revxtreme.com/projects/images/joed_6_lrg.jpg

MORE INFO

David

Musclerodz 03-14-2006 06:39 PM

Steve Rupp had some special ones made too, don't know where though.

Mike

Tim Baillie 03-15-2006 12:39 AM

I Have a couple of links at the shop, I will post them tomorrow.

There is one guy I use that can make them as detailed as you want and in any material.

Steve1968LS2 03-15-2006 10:19 AM

Quote:

Originally Posted by Musclerodz
Steve Rupp had some special ones made too, don't know where though.

Mike

I bought them that way.. From Ecklers Corvette as I recall. custom badges really finish off the car.

Damn True 03-15-2006 10:49 AM

Badges? We don't need no stinkin badges!
http://www.darryl.com/badges/madre7.jpg

Diognes56 03-16-2006 07:13 PM

Quote:

Originally Posted by HzEmall Customs
I Have a couple of links at the shop, I will post them tomorrow.

There is one guy I use that can make them as detailed as you want and in any material.

That would be great. Thanks :D .

David

Tim Baillie 03-17-2006 12:40 AM

Here is the website, the guys name is Tom I believe.

http://think3d.biz/

Their email on the site doesn't work though so give them a call.


All times are GMT -5. The time now is 09:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net