L & H Kustoms Pro Billet Spindles
 

ok everyone we have our spindles in stock and are looking for a few select cars to have these installed on with an install thread with photos. I would like some A,F,X bodied cars that will see some track duty this spring to run our spindles and provide feedback and to get some exposure to build brand recognition. I feel very confident in our product and have put thousands of miles on them but would like some feedback from others to help build our brand. We need cars that are either already roadworthy or will be within 3 months so if your interested in a sponsorship please send your sponsorship proposal to [email protected]

Congrats Luke on getting them into production and on the shelf, I know it's been a lot of work!! :cheers:

Let's see some pictures of those suckers! :unibrow:

Luke -- Post up some pictures buddy! The versions shown on your website are beautiful!

Ask and you shall receive.....

http://i370.photobucket.com/albums/o...s/IMG_1010.jpg
http://i370.photobucket.com/albums/o...s/IMG_1011.jpg
http://i370.photobucket.com/albums/o...s/IMG_1013.jpg
http://i370.photobucket.com/albums/o...s/IMG_1012.jpg

here are our hubs which include hubs, bearings, seals and screw in studs

http://i370.photobucket.com/albums/o...billethubs.jpg
http://i370.photobucket.com/albums/o...illethubs2.jpg

and here are our billet caliper brackets for C5/C6 calipers for the front

http://i370.photobucket.com/albums/o...s/IMG_1014.jpg

And our rear caliper brackets to run C5/C6 brakes on GM 10/12 bolt rearends which allow you to clock your rotors to your taste 90 deg up 17.5 deg more or up to 45 deg

http://i370.photobucket.com/albums/o...s/IMG_1015.jpg

Very nice :thumbsup:

Let me know when you have a 65 mustang spindle ready. I would love to test it out for you. I have a 65 falcon with my engineering front suspension. Also I have a intermeccanica omega that i will be building a custom front suspension for. Let me know how what you think about using that as a test vehicle for you.

I will let you know. We are finishing up our GM applications first then will finish the mustang spindles. We already have the spindles for A,F,X cars and are working on 2nd gen F body, Gbody/S10 and B-body cars which we will have ready by mid january then probably have the mustang spindles available sometime in february.

hey no cutting in line. I was here first. J/K.... I've got a Maverick with a TCP c/o front end in need of some Mustang drop spindles. Keep me on the short list for a pair.